Sample Record
Owner Lab
- CT D08 - Fontana Southern Regional Laboratory
DIME Sample ID 2022-08-17-68
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 212112 DEA: 080C2514 EFIS: 0816000076 COOP: 081645 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-10-0.0/13.2 |
| Award Date | 06/06/2018 |
| Closeout Date | Not set |
| Work Description | Design-Build of I-10 Corridor Contract 1 - Adding 2 new Express Lanes |
| Location Description | LA/SBD County Line to PM 13.2 near I-15 |
| QA Service Level | 1 (Verified on 10/16/2019) |
Sample Information
| Sample Taken Date | 08/17/2022 | Sample Unique Key | 68 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/01/2022 |
| Sample type | Verification | A brief description of the sample | JMF 3/4" HMA-A-SP R15 0.75% LAS |
| The quantity of what the sample constitutes | 4 Bags Of ColdfeedAgg., 2 Bags of Rap | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0605A-22 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Vulcan Materials-Irwindale | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0035 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | 220831A IRW SJR LS | A detailed description of where the material sample was collected | Belt Cut at Vulcan Materials-Irwindale |
| Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/4 inch |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2022-08-17-68-1 | AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis) | Satish Jain/ Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 09/06/2022 | 09/10/2022 | No | Combined Virgin Aggregate Gradation | |||
| 2022-08-17-68-2 | AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity) | Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory | 09/05/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-3 | AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity) | Larry Diaz, CT D08 - Fontana Southern Regional Laboratory | 09/07/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-4 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Seige M., CT D08 - Fontana Southern Regional Laboratory | 09/06/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-5 | AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent) | MD Tarafdar, CT D08 - Fontana Southern Regional Laboratory | 09/06/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-6 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 09/07/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-7 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 09/07/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-8 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Satish Jain, CT D08 - Fontana Southern Regional Laboratory | 09/07/2022 | 09/10/2022 | No | ||||
| 2022-08-17-68-9 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Ronica Bhuyian, CT D08 - Fontana Southern Regional Laboratory | 09/07/2022 | 09/10/2022 | No | Rap Gradation After Ignition | |||
| 2022-08-17-68-10 | CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates | Satish Jain/Robert Jarquin, CT D08 - Fontana Southern Regional Laboratory | 09/07/2022 | 09/10/2022 | No | Combined Aggregate Gradation W/Rap Gradation Correlation Factors |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2022-08-17-68-1 AASHTO T27-14
DIME Test ID: 2022-08-17-68-2 AASHTO T84-14
DIME Test ID: 2022-08-17-68-3 AASHTO T85-13
DIME Test ID: 2022-08-17-68-4 AASHTO T96-02r10
DIME Test ID: 2022-08-17-68-5 AASHTO T176-08
DIME Test ID: 2022-08-17-68-6 AASHTO T304-11
DIME Test ID: 2022-08-17-68-7 AASHTO T335-09r13
DIME Test ID: 2022-08-17-68-8 ASTM D4791-10
DIME Test ID: 2022-08-17-68-9 CTM 202-November 2011
DIME Test ID: 2022-08-17-68-10 CTM 202-November 2011