DIME - Sample Record for DIME Sample ID 2021-06-16-36

DIME » All Projects » Project - DEA: 021J4404 » Sample 2021-06-16-36 » Sample Details

Sample Record

Owner Lab

CT HQ - Sacramento Asphalt Binder Laboratory

DIME Sample ID 2021-06-16-36

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215250 DEA: 021J4404 EFIS: 0220000079
DIST-CO-RTE-PM	02-MOD-299-20.0/23.1,23.5/24.5,33.5/37.5
Award Date	12/14/2020
Closeout Date	09/27/2021
Work Description	ASPHALT RUBBER CHIP SEAL.
Location Description	MODOC COUNTY AT VARIOUS LOCATIONS FROM 1.8 MILES WEST OF ROUTE 139 TO 0.3 MILE WEST OF RATTLESNAKE CREEK BRIDGE
QA Service Level	1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date	06/16/2021	Sample Unique Key	36
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	06/24/2021
Sample type	Department Acceptance	A brief description of the sample	PG64-28M
The quantity of what the sample constitutes	2 cans	From where was the sample collected	Source
First name of sampler or witnessed by	C	Last name of sampler or witnessed by	B
Title of sampler	TET	Telephone number of sampler
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	Albina - Klamath Falls, OR	Transportation Laboratory (TL) Number	768795
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Asphalt Binder	Performance Grade	PG 64-28 M
Modified	Yes	Lot number
Sublot number		Tank number
Time of sample		HMA Supplier
Certified Asphalt Supplier	Albina Asphalt - Klamath Falls Plant - Klamath Falls OR	Multigrade	No
Multigrade Type		Asphalt Binder Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Test Comments	Privacy Level
2021-06-16-36-1	AASHTO T240-17: Standard Method of Test for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)	Harish Thakur, CT HQ - Sacramento Asphalt Binder Laboratory	08/08/2021	Yes	08/11/2021	Per 2018 Standard Specifications	Public - Test Data Visible
2021-06-16-36-2	AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	Erika Gonzalez, CT HQ - Sacramento Asphalt Binder Laboratory	08/08/2021	Yes	08/11/2021	Per 2018 standard specifications	Public - Test Data Visible
2021-06-16-36-3	AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	Erika Gonzalez, CT HQ - Sacramento Asphalt Binder Laboratory	08/08/2021	Yes	08/11/2021	Per 2018 Standard Specifications +6C	Public - Test Data Visible
2021-06-16-36-4	AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)	HT, CT HQ - Sacramento Asphalt Binder Laboratory	08/09/2021	Yes	08/11/2021	Per 2018 Standard Specifications PAV	Public - Test Data Visible
2021-06-16-36-5	AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)	Ruben Macias, CT HQ - Sacramento Asphalt Binder Laboratory	08/09/2021	Yes	08/11/2021	Per 2018 Standard Specifications	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-06-16-36-1 AASHTO T240-17 (Verified)
DIME Test ID: 2021-06-16-36-2 AASHTO T315-20 (Verified)
DIME Test ID: 2021-06-16-36-3 AASHTO T315-20 (Verified)
DIME Test ID: 2021-06-16-36-4 AASHTO T315-20 (Verified)
DIME Test ID: 2021-06-16-36-5 AASHTO T313-19 (Verified)