DIME - Sample Record for DIME Sample ID 2021-05-19-41

DIME » All Projects » Project - DEA: 021J4704 » Sample 2021-05-19-41 » Sample Details

Sample Record

Owner Lab

CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-05-19-41

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 215252 DEA: 021J4704 EFIS: 0220000082
DIST-CO-RTE-PM	02-TRI-3-46.7/49.8,63.8/67.704
Award Date	12/18/2020
Closeout Date	09/30/2021
Work Description	HMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location Description	TRINITY COUNTY NEAR TRINITY CENTER FROM 0.7 MILE NORTH OF CEDAR STOCK ROAD TO DIENER MINE VIADUCT AND FROM 2.3 MILES NORTH OF EL DORADO WAY TO COFFEE CREEK BRIDGE NO. 05-0060
QA Service Level	1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date	05/19/2021	Sample Unique Key	41
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	05/19/2021
Sample type	Department Acceptance	A brief description of the sample	Treated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP
The quantity of what the sample constitutes	Production Start-Up Evaluation	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Darrell	Last name of sampler or witnessed by	Valasek
Title of sampler		Telephone number of sampler
Laboratory sample identification	D78804	Linked DIME Sample ID
The fabricator/manufacturer/facility name	JF Shea Construction - Fawndale Rock and Asphalt - Redding, CA	Transportation Laboratory (TL) Number	002873
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Information

Material Type	Hot Mix Asphalt	HMA Type	Type A HMA
HMA Grading	3/8 inch	Lot number
Sublot number		HMA Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Submitted By	Verified?	Release Date	Test Comments
2021-05-19-41-1	AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	07/28/2021	Ward Jenkins	Yes	07/30/2021
2021-05-19-41-2	AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/19/2021	Ward Jenkins	Yes	07/30/2021
2021-05-19-41-3	AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/20/2021	Ward Jenkins	Yes	07/30/2021
2021-05-19-41-4	AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)	Darrell Valasek, CT D02 - Redding Northern Regional Laboratory	05/20/2021	Ward Jenkins	Yes	07/30/2021	VMA = 16.8, VFA = 73.2, DP = 1.0
2021-05-19-41-5	AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)	Sweeny, Valasek, and T.Mc., CT D02 - Redding Northern Regional Laboratory	05/27/2021	Ward Jenkins	Yes	07/30/2021
2021-05-19-41-6	AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)	Dennis Hickey, CT D02 - Redding Northern Regional Laboratory	05/25/2021	Ward Jenkins	Yes	07/30/2021

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-05-19-41-1 AASHTO T308-10 (Verified)
DIME Test ID: 2021-05-19-41-2 AASHTO T209-12 (Verified)
DIME Test ID: 2021-05-19-41-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2021-05-19-41-4 AASHTO T269-14 (Verified)
DIME Test ID: 2021-05-19-41-5 AASHTO T283-14 (Verified)
DIME Test ID: 2021-05-19-41-6 AASHTO T324-14 (Verified)