Sample Record

Owner Lab

  • CT D02 - Redding Northern Regional Laboratory

DIME Sample ID 2021-05-19-41

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 215252
DEA: 021J4704
EFIS: 0220000082
DIST-CO-RTE-PM02-TRI-3-46.7/49.8,63.8/67.704
Award Date12/18/2020
Closeout Date09/30/2021
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING AND SHOULDER BACKING.
Location DescriptionTRINITY COUNTY NEAR TRINITY CENTER FROM 0.7 MILE NORTH OF CEDAR STOCK ROAD TO DIENER MINE VIADUCT AND FROM 2.3 MILES NORTH OF EL DORADO WAY TO COFFEE CREEK BRIDGE NO. 05-0060
QA Service Level1 (Verified on 10/30/2020)

Sample Information

Sample Taken Date05/19/2021 Sample Unique Key41
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/19/2021
Sample typeAcceptance A brief description of the sampleTreated 3/8-inch Type A HMA (eq. PG 64-28 M) with 25.0% RAP
The quantity of what the sample constitutesProduction Start-Up Evaluation From where was the sample collectedManufacturer
First name of sampler or witnessed byDarrell Last name of sampler or witnessed byValasek
Title of sampler Telephone number of sampler
Laboratory sample identificationD78804 Linked DIME Sample ID
The fabricator/manufacturer/facility nameJF Shea Construction - Fawndale Rock and Asphalt - Redding, CA Transportation Laboratory (TL) Number002873
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/8 inch Lot number
Sublot number HMA Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedSubmitted ByVerified?Release DateTest CommentsActions
2021-05-19-41-1AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory07/28/2021Ward Jenkins
Yes
07/30/2021
2021-05-19-41-2AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/19/2021Ward Jenkins
Yes
07/30/2021
2021-05-19-41-3AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/20/2021Ward Jenkins
Yes
07/30/2021
2021-05-19-41-4AASHTO T269-14: Standard Method of Test for Percent Air Voids in Compacted Dense and Open Asphalt Mixtures (Air Void)Darrell Valasek, CT D02 - Redding Northern Regional Laboratory05/20/2021Ward Jenkins
Yes
07/30/2021VMA = 16.8, VFA = 73.2, DP = 1.0
2021-05-19-41-5AASHTO T283-14: Standard Method of Test for Resistance of Compacted Asphalt Mixtures to Moisture-Induced Damage (Moisture Content)Sweeny, Valasek, and T.Mc., CT D02 - Redding Northern Regional Laboratory05/27/2021Ward Jenkins
Yes
07/30/2021
2021-05-19-41-6AASHTO T324-14: Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures (Hamburg Wheel Track)Dennis Hickey, CT D02 - Redding Northern Regional Laboratory05/25/2021Ward Jenkins
Yes
07/30/2021

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2021-05-19-41-1 AASHTO T308-10 (Verified)
DIME Test ID: 2021-05-19-41-2 AASHTO T209-12 (Verified)
DIME Test ID: 2021-05-19-41-3 AASHTO T275-07r12 (Verified)
DIME Test ID: 2021-05-19-41-4 AASHTO T269-14 (Verified)
DIME Test ID: 2021-05-19-41-5 AASHTO T283-14 (Verified)
DIME Test ID: 2021-05-19-41-6 AASHTO T324-14 (Verified)