DIME - Sample Record for DIME Sample ID 2021-05-21-22

DIME » All Projects » Project - DEA: 120N4904 » Sample 2021-05-21-22 » Sample Details

Sample Record

DIME Sample ID 2021-05-21-22

Sample is locked from editing. info

Project Information

Project Identifiers	Project ID: 214228 DEA: 120N4904 EFIS: 1214000050
DIST-CO-RTE-PM	12-ORA-91-R12.5/R13.9
Award Date	11/29/2022
Closeout Date	11/07/2023
Work Description	VEHICLE ENFORCEMENT FACILITY IMPROVEMENT AT PERALTA WEIGH STATION.
Location Description	ORANGE COUNTY IN ANAHEIM FROM 1.0 MILE EAST OF ROUTE 91/90 SEPARATION TO 0.5 MILE WEST OF WEIR CANYON ROAD UNDERCROSSING
QA Service Level	1 (Verified on 08/13/2019)

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

Sample Information

Sample Taken Date	05/21/2021	Sample Unique Key	22
Date that the sample was received by the laboratory/organization performing the testing	06/03/2021	Sample type	Verification
A brief description of the sample	PSUE 3/4" RWMA-G-SP 0.40% Evotherm	The quantity of what the sample constitutes	3 Bags Of Combined Aggregate
From where was the sample collected	Manufacturer	First name of sampler or witnessed by	All American Asphalt
Last name of sampler or witnessed by	QC	Title of sampler
Telephone number of sampler		Laboratory sample identification	0330G-21
Linked DIME Sample ID		The fabricator/manufacturer/facility name	All American Asphalt Corona
Transportation Laboratory (TL) Number		Inspector Lot Number from the Transportation Laboratory (TL) Form
Structure unique identifier		Structure name
Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample	3/4 RWMA-G-SP	The fabricator/manufacturer designation for the sample
The plant number	108835	A detailed description of where the material sample was collected	Belt Cut at All American Corona Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Verified?	Release Date	Test Comments	Privacy Level
2021-05-21-22-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Satish Jain/Edmond Jabbour, CT D08 - Fontana Southern Regional Laboratory	06/04/2021	Yes	06/09/2021	Combined Virgin Aggregate Gradation	Public - Test Data Visible
2021-05-21-22-2	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	06/07/2021	Yes	06/09/2021		Public - Test Data Visible
2021-05-21-22-3	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory	06/07/2021	Yes	06/09/2021		Public - Test Data Visible
2021-05-21-22-4	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/06/2021	Yes	06/09/2021		Public - Test Data Visible
2021-05-21-22-5	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	06/07/2021	Yes	06/09/2021		Public - Test Data Visible
2021-05-21-22-6	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/08/2021	Yes	06/09/2021		Public - Test Data Visible
2021-05-21-22-7	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/08/2021	Yes	06/09/2021		Public - Test Data Visible
2021-05-21-22-8	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	Satish Jain, CT D08 - Fontana Southern Regional Laboratory	06/08/2021	Yes	06/09/2021		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2021-05-21-22-1 AASHTO T27-14 (Verified)
DIME Test ID: 2021-05-21-22-2 AASHTO T84-14 (Verified)
DIME Test ID: 2021-05-21-22-3 AASHTO T85-13 (Verified)
DIME Test ID: 2021-05-21-22-4 AASHTO T96-02r10 (Verified)
DIME Test ID: 2021-05-21-22-5 AASHTO T176-08 (Verified)
DIME Test ID: 2021-05-21-22-6 AASHTO T304-11 (Verified)
DIME Test ID: 2021-05-21-22-7 AASHTO T335-09r13 (Verified)
DIME Test ID: 2021-05-21-22-8 ASTM D4791-10 (Verified)