DIME » All Projects » Project - DEA: 120N4904 » Sample 2020-11-12-24 » Sample Details

Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2020-11-12-24

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 214228
DEA: 120N4904
EFIS: 1214000050
DIST-CO-RTE-PM12-ORA-91-R12.5/R13.9
Award Date11/29/2022
Closeout Date11/07/2023
Work DescriptionVEHICLE ENFORCEMENT FACILITY IMPROVEMENT AT PERALTA WEIGH STATION.
Location DescriptionORANGE COUNTY IN ANAHEIM FROM 1.0 MILE EAST OF ROUTE 91/90 SEPARATION TO 0.5 MILE WEST OF WEIR CANYON ROAD UNDERCROSSING
QA Service Level1 (Verified on 08/13/2019)

Sample Information

Sample Taken Date11/12/2020 Sample Unique Key24
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/09/2020
Sample typeVerification A brief description of the sampleJMF 3/4" RWMA-G-SP,0.40% Evotherm
The quantity of what the sample constitutes4 Bags Combined Agg., From where was the sample collectedManufacturer
First name of sampler or witnessed byRMA Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0688G-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0005
The fabricator's/manufacturer's product name for the sample3/4 RWMA-G-SP The fabricator/manufacturer designation for the sample
The plant number108835 A detailed description of where the material sample was collectedBelt Cut at All American Corona Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2020-11-12-24-1AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Satish Jain/Dominic Montermayor, CT D08 - Fontana Southern Regional Laboratory12/09/2020
Yes
12/30/2020Combined Virgin Aggregate GradationPublic - Test Data Visible
2020-11-12-24-2AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory12/12/2020
Yes
12/30/2020Public - Test Data Visible
2020-11-12-24-3AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory12/10/2020
Yes
12/30/2020Public - Test Data Visible
2020-11-12-24-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Danilo Ferrer, CT D08 - Fontana Southern Regional Laboratory12/10/2020
Yes
12/30/2020Public - Test Data Visible
2020-11-12-24-5AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)Sebastian Ferrer, CT D08 - Fontana Southern Regional Laboratory12/15/2020
Yes
12/30/2020Public - Test Data Visible
2020-11-12-24-6AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Larry Diaz, CT D08 - Fontana Southern Regional Laboratory12/16/2020
Yes
12/30/2020Public - Test Data Visible
2020-11-12-24-7ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory12/12/2020
Yes
12/30/2020Public - Test Data Visible
2020-11-12-24-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Satish Jain, CT D08 - Fontana Southern Regional Laboratory12/12/2020
Yes
12/30/2020Public - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2020-11-12-24-1 AASHTO T27-14 (Verified)
DIME Test ID: 2020-11-12-24-2 AASHTO T335-09r13 (Verified)
DIME Test ID: 2020-11-12-24-3 AASHTO T85-13 (Verified)
DIME Test ID: 2020-11-12-24-4 AASHTO T84-14 (Verified)
DIME Test ID: 2020-11-12-24-5 AASHTO T96-02r10 (Verified)
DIME Test ID: 2020-11-12-24-6 AASHTO T176-08 (Verified)
DIME Test ID: 2020-11-12-24-7 ASTM D4791-10 (Verified)
DIME Test ID: 2020-11-12-24-8 AASHTO T304-11 (Verified)