Sample Record
Owner Lab
- BSK Associates
DIME Sample ID 2025-02-27-54
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
Project Information
| Project Identifiers | Project ID: 209109 DEA: 043G9004 EFIS: 0412000557 COOP: 042513 |
|---|---|
| DIST-CO-RTE-PM | 04-SON-116,121-46.0/46.7,5.8/R7.4 |
| Award Date | 07/31/2023 |
| Closeout Date | Not set |
| Work Description | MODIFY EXISTING STATE ROUTE 116,121 BONNEAU ROAD INTERSECTION FROM A 4 WAY STOP CONTROLLED INTERSECTION TO A ROUNDABOUT AND SIGNALIZED INTERSECTION. |
| Location Description | SONOMA COUNTY |
| QA Service Level | 1 (Verified on 08/15/2022) |
Sample Information
| Sample Taken Date | 02/27/2025 | Sample Unique Key | 54 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/12/2025 |
| Sample type | Production Start-Up | A brief description of the sample | 3/4" HMA-RAP25% |
| The quantity of what the sample constitutes | 3 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cody | Last name of sampler or witnessed by | Cordero |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | D04-SE-25-003 | Linked DIME Sample ID | 2025-02-27-55 |
| The fabricator/manufacturer/facility name | Vulcan Lake Herman Drum Plant | Transportation Laboratory (TL) Number | C100561 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | 1-1 | Structure unique identifier | |
| Structure name | Bid Item | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-48-0002 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 220304 | The fabricator/manufacturer designation for the sample | |
| The plant number | A detailed description of where the material sample was collected | Conveyer Belt-HMA Plant | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
| The concrete mix design number | Lot number | 1 | |
| Sublot number | 1 | Aggregate Mix Number |
Submitted Tests
| DIME Test ID | Test Method | Tester Name, Testing Lab | Date Tested | Date Added | Verified? | Release Date | Test Comments | Privacy Level | Actions |
|---|---|---|---|---|---|---|---|---|---|
| 2025-02-27-54-1 | AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles) | Nicholas Shelly, BSK Associates | 03/18/2025 | 09/05/2025 | No | Coarse, 2 faced=97.9%, Coarse, 1 faced=100%; Fine, 1 faced=100% | |||
| 2025-02-27-54-2 | AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler) | Nicholas Shelly, BSK Associates | 03/18/2025 | 09/05/2025 | No | Grading B, 100 revolutions=4.4%, 500 revolutions=17.9% | |||
| 2025-02-27-54-3 | AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles) | Nicholas Shelly, BSK Associates | 03/18/2025 | 09/05/2025 | No | Average uncompacted voids=46.8% | |||
| 2025-02-27-54-4 | ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles) | Nicholas Shelly, BSK Associates | 03/18/2025 | 09/05/2025 | No | Flat and elongated particles=0% |
Sample File Attachments
| File Name | Extension | Date Uploaded | Actions |
|---|---|---|---|
| No results found. | |||
Test File Attachments
DIME Test ID: 2025-02-27-54-1 AASHTO T335-09r13
DIME Test ID: 2025-02-27-54-2 AASHTO T96-02r10
DIME Test ID: 2025-02-27-54-3 AASHTO T304-11
DIME Test ID: 2025-02-27-54-4 ASTM D4791-10