DIME - Sample Record for DIME Sample ID 2025-03-04-12

DIME » All Projects » Project - DEA: 031H9904 » Sample 2025-03-04-12 » Sample Details

Sample Record

Owner Lab

CT HQ - QASI Bay Area Field Office

DIME Sample ID 2025-03-04-12

Project Information

Project Identifiers	Project ID: 994525 DEA: 031H9904 EFIS: 0317000043
DIST-CO-RTE-PM	03-PLA,NEV-80-68.3/69.7,0.0/R2.7
Award Date	11/07/2023
Closeout Date	Not set
Work Description	RDWY EXC, PLACE HMA & JPCP, SLAB REPLACEMENT & POLYESTER CONC OVERLAY.
Location Description	PLACER AND NEVADA COUNTIES NEAR KINGVALE FROM 0.3 MILE WEST OF TROY UNDERCROSSING TO 0.2 MILE EAST OF SODA SPRINGS OVERCROSSING
QA Service Level	1 (Verified on 05/15/2023)

Sample Information

Sample Taken Date	03/04/2025	Sample Unique Key	12
Will the laboratory/organization for which you are a member perform testing on this material sample?	No	Date that the sample was received by the laboratory/organization performing the testing	04/17/2025
Sample type	Quality Assurance	A brief description of the sample	High Strength Fastener Assemblies
The quantity of what the sample constitutes	105	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Chris	Last name of sampler or witnessed by	Dsouza
Title of sampler		Telephone number of sampler	9493852715
Laboratory sample identification		Linked DIME Sample ID
The fabricator/manufacturer/facility name	St Louis Screw and Bolt	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	SMTL TM3 - Fastener Assembly	Rocap Number(s)	TT0187160
Heat Number(s)	20952160 10885510 149067	Nut Mfg. Lot Number(s)	24-19-007
Washer Mfg. Lot Number(s)	149067 / 44254	Bolt Specification	A325-1
Bolt Length(s)	1-3/4	Nut Specification	A563-DH
Washer Specification	F436-1	Finish	HDG
Diameter/Size	1/2	Bolt Mfg. Lot Number	BG2926
Rocap Test Requirement(s)		Lubricant Requirements(s)
Washer Inner Diameter(s)

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Privacy Level
2025-03-04-12-1	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/18/2025	04/18/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-2	ASME B1.2-83r17: (Ring Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Ring Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/18/2025	04/18/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-3	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/18/2025	04/18/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-4	ASME B1.2-83r17: (Plug Gage) Gages and Gaging for Unified Inch Screw Threads - Errata May 1992 (Plug Gage)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	04/18/2025	04/18/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-5	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/14/2025	05/14/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-6	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/14/2025	05/14/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-7	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/14/2025	05/14/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-8	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/14/2025	05/14/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-9	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/14/2025	05/14/2025	Yes	05/16/2025	Public - Test Data Visible
2025-03-04-12-10	ASTM B499-09r21: Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals (Coating)	Andrew Auvinen, CT HQ - Sacramento Structural Materials Testing Laboratory	05/14/2025	05/14/2025	Yes	05/16/2025	Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2025-03-04-12-1 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-04-12-2 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-04-12-3 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-04-12-4 ASME B1.2-83r17 (Verified)
DIME Test ID: 2025-03-04-12-5 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-04-12-6 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-04-12-7 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-04-12-8 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-04-12-9 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-04-12-10 ASTM B499-09r21 (Verified)
DIME Test ID: 2025-03-04-12-11 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-04-12-12 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-04-12-13 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-04-12-14 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-04-12-15 ASTM E18-20 (Verified)
DIME Test ID: 2025-03-04-12-16 ASTM E18-20 (Verified)