DIME - Sample Record for DIME Sample ID 2025-02-03-7

DIME » All Projects » Project - DEA: 081J3004 » Sample 2025-02-03-7 » Sample Details

Sample Record

Owner Lab

CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2025-02-03-7

Project Information

Project Identifiers	Project ID: 1000606 DEA: 081J3004 EFIS: 0818000016
DIST-CO-RTE-PM	08-SBD-18-90.9/R96.6
Award Date	12/06/2024
Closeout Date	Not set
Work Description	HMA (TYPE A), MOD SIGNAL & LTG SYSTEMS, & COLD PLANE AC PVMT.
Location Description	SAN BERNARDINO COUNTY IN AND NEAR VICTORVILLE FROM APPLE VALLEY INN ROAD TO ROUTE 15/18 SEPARATION
QA Service Level	1 (Verified on 01/13/2025)

Sample Information

Sample Taken Date	02/03/2025	Sample Unique Key	7
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	02/05/2025
Sample type	Verification	A brief description of the sample	JMF 3/4" HMA-A-Sp R25 0.6% EVO
The quantity of what the sample constitutes	4 Bags of Combined Aggregate, 2 Bags of RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Jediv	Last name of sampler or witnessed by	Vasquez
Title of sampler		Telephone number of sampler
Laboratory sample identification	0125A-25	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Ingevity, World Oil, Cal Portland Scheer Quarry, Agcon Inc	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name		Bid Item	Not set

Material Information

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-36-0046, 91-36-0022
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	Belt Cut at Blue Diamond Victorville Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number	300154 R25	Lot number
Sublot number		Aggregate Mix Number

Submitted Tests

DIME Test ID	Test Method	Tester Name, Testing Lab	Date Tested	Date Added	Verified?	Release Date	Test Comments	Privacy Level
2025-02-03-7-1	AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)	Robert Guillen, CT D08 - Fontana Southern Regional Laboratory	02/09/2025	04/24/2025	Yes	01/30/2026	Combined Virgin Aggregate Gradation	Public - Test Data Visible
2025-02-03-7-2	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Robert Guillen, CT D08 - Fontana Southern Regional Laboratory	02/19/2025	04/24/2025	Yes	01/30/2026	Comb. Virgin Agg, Gradation W/Rap Gradation Correlation Factors	Public - Test Data Visible
2025-02-03-7-3	CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates	Robert Guillen, CT D08 - Fontana Southern Regional Laboratory	02/13/2025	04/24/2025	Yes	01/30/2026	Rap Gradation After Ignition	Public - Test Data Visible
2025-02-03-7-4	AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)	Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory	02/07/2025	04/24/2025	Yes	01/30/2026		Public - Test Data Visible
2025-02-03-7-5	AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)	Robert Guillen, CT D08 - Fontana Southern Regional Laboratory	02/07/2025	04/24/2025	Yes	01/30/2026		Public - Test Data Visible
2025-02-03-7-6	AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)	David Padilla/RG, CT D08 - Fontana Southern Regional Laboratory	02/14/2025	04/24/2025	Yes	01/30/2026		Public - Test Data Visible
2025-02-03-7-7	AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)	Robert Guillen, CT D08 - Fontana Southern Regional Laboratory	02/09/2025	04/24/2025	Yes	01/30/2026		Public - Test Data Visible
2025-02-03-7-8	AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)	David Padilla, CT D08 - Fontana Southern Regional Laboratory	02/10/2025	04/24/2025	Yes	01/30/2026	The FAA is below spec.	Public - Test Data Visible
2025-02-03-7-9	AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)	David Padilla, CT D08 - Fontana Southern Regional Laboratory	02/10/2025	04/24/2025	Yes	01/30/2026		Public - Test Data Visible
2025-02-03-7-10	ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)	David Padilla, CT D08 - Fontana Southern Regional Laboratory	02/10/2025	04/24/2025	Yes	01/30/2026		Public - Test Data Visible

Sample File Attachments

File Name	Extension	Date Uploaded	Actions
No results found.

Test File Attachments

DIME Test ID: 2025-02-03-7-1 AASHTO T27-14 (Verified)
DIME Test ID: 2025-02-03-7-2 CTM 202-November 2011 (Verified)
DIME Test ID: 2025-02-03-7-3 CTM 202-November 2011 (Verified)
DIME Test ID: 2025-02-03-7-4 AASHTO T84-14 (Verified)
DIME Test ID: 2025-02-03-7-5 AASHTO T85-13 (Verified)
DIME Test ID: 2025-02-03-7-6 AASHTO T96-02r10 (Verified)
DIME Test ID: 2025-02-03-7-7 AASHTO T176-08 (Verified)
DIME Test ID: 2025-02-03-7-8 AASHTO T304-11 (Verified)
DIME Test ID: 2025-02-03-7-9 AASHTO T335-09r13 (Verified)
DIME Test ID: 2025-02-03-7-10 ASTM D4791-10 (Verified)