Sample Record

Owner Lab

  • CT D08 - Fontana Southern Regional Laboratory

DIME Sample ID 2025-01-30-17

Project Information

Project IdentifiersProject ID: 1000101
DEA: 081J2904
EFIS: 0818000015
DIST-CO-RTE-PM08-RIV-215-25.0/R31.2
Award Date06/18/2024
Closeout DateNot set
Work DescriptionRHMA, HMA, REPLACE AC SURFACING, AND COLD PLANE AC PVMT.
Location DescriptionRIVERSIDE COUNTY IN AND NEAR PERRIS FROM 0.1 MILE SOUTH OF SAN JACINTO RIVER BRIDGE TO 0.3 MILE NORTH OF RAMONA EXPRESSWAY
QA Service Level1 (Verified on 05/15/2024)

Sample Information

Sample Taken Date01/30/2025 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/31/2025
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-R25 0.4% EVO
The quantity of what the sample constitutes4 Bags of Combined Aggregate, 2 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byGabriel Last name of sampler or witnessed byRamirez
Title of sampler Telephone number of sampler
Laboratory sample identification0117A-25 Linked DIME Sample ID
The fabricator/manufacturer/facility nameIngevity, Valero Wilmington, Chandler Agg Lake Elsinore Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0098
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedBelt Cut at Martin Marietta - Lake Elsinore
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number53417195 WM Lot number
Sublot number Aggregate Mix Number

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-01-30-17-1CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesRobert Guillen/R. J./D.P., CT D08 - Fontana Southern Regional Laboratory02/05/202504/24/2025
No
Comb. Virgin Aggregate Gradation W/ Rap Gradation Correlation Factors
2025-01-30-17-2CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse AggregatesRobert Guillen, CT D08 - Fontana Southern Regional Laboratory02/05/202504/24/2025
No
Rap Gradation After Ignition
2025-01-30-17-3AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)Ronica B/David Padilla/R.J., CT D08 - Fontana Southern Regional Laboratory02/05/202504/24/2025
No
Combined Virgin Aggregate Gradation
2025-01-30-17-4AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)Friday Ofoegbu, CT D08 - Fontana Southern Regional Laboratory02/04/202504/24/2025
No
2025-01-30-17-5AASHTO T85-13: Standard Method of Test for Specific Gravity and Absorption of Coarse Aggregate (Coarse Specific Gravity)Robert Guillen, CT D08 - Fontana Southern Regional Laboratory02/04/202504/24/2025
No
2025-01-30-17-6AASHTO T96-02r10: Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine (Los Angeles Rattler)David Padilla, CT D08 - Fontana Southern Regional Laboratory02/04/202504/24/2025
No
2025-01-30-17-7AASHTO T176-08: Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test (Sand Equivalent)Robert Guillen, CT D08 - Fontana Southern Regional Laboratory02/04/202504/24/2025
No
2025-01-30-17-8AASHTO T304-11: Standard Method of Test for Uncompacted Void Content of Fine Aggregate (Fine of Crushed Particles)Ronica B, CT D08 - Fontana Southern Regional Laboratory02/06/202504/24/2025
No
2025-01-30-17-9AASHTO T335-09r13: Standard Method of Test for Determining the Percentage of Fracture in Coarse Aggregate (Percent of Crushed Particles)Ronica B, CT D08 - Fontana Southern Regional Laboratory02/06/202504/24/2025
No

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-01-30-17-1 CTM 202-November 2011
DIME Test ID: 2025-01-30-17-2 CTM 202-November 2011
DIME Test ID: 2025-01-30-17-3 AASHTO T27-14
DIME Test ID: 2025-01-30-17-4 AASHTO T84-14
DIME Test ID: 2025-01-30-17-5 AASHTO T85-13
DIME Test ID: 2025-01-30-17-6 AASHTO T96-02r10
DIME Test ID: 2025-01-30-17-7 AASHTO T176-08
DIME Test ID: 2025-01-30-17-8 AASHTO T304-11
DIME Test ID: 2025-01-30-17-9 AASHTO T335-09r13