Sample Record

Owner Lab

  • CT D11 - District 11 Materials Laboratory

DIME Sample ID 2025-10-27-51

Sample is locked from editing. info

Project Information

Project IdentifiersProject ID: 1000540
DEA: 051Q03U4
EFIS: 0524000192
DIST-CO-RTE-PM05-SLO,KER-46-60.3/60.8,0.0/0.4
Award Date12/13/2024
Closeout DateNot set
Work DescriptionVERTICAL CURVE AND EXTEND EXISTING TRUCK CLIMBING LANE.
Location DescriptionSAN LUIS OBISPO AND KERN COUNTIES NEAR CHOLAME FROM 2.0 MILES EAST OF ANTELOPE ROAD TO 0.4 MILE EAST OF THE KERN COUNTY LINE.
QA Service Level1 (Verified on 09/09/2024)

Sample Information

Sample Taken Date10/27/2025 Sample Unique Key51
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/09/2026
Sample typeDispute Resolution A brief description of the sampleDispute Sample
The quantity of what the sample constitutes8 boxes From where was the sample collectedManufacturer
First name of sampler or witnessed byCarlos Last name of sampler or witnessed byManzo
Title of samplerSPM QC Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID2025-10-27-52
The fabricator/manufacturer/facility namePapich Construction Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name Bid ItemNot set

Material Information

Material TypeHot Mix Asphalt HMA TypeType A HMA
HMA Grading3/4 inch Lot number2
Sublot number11 HMA Mix Number39AC34LMA
Binder content (%)0.0 Virgin binder PG
Design binder PG Binder Supplier
RAP content (%)Not set WMA Additives
Antistrip type-

Submitted Tests

DIME Test IDTest MethodTester Name, Testing LabDate TestedDate AddedVerified?Release DateTest CommentsPrivacy LevelActions
2025-10-27-51-1AASHTO T308-25: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory01/15/202601/13/2026
Yes
01/15/2026Does Not Comply Target 5.00Public - Test Data Visible
2025-10-27-51-2AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory01/14/202601/14/2026
Yes
01/15/2026CompliesPublic - Test Data Visible
2025-10-27-51-3AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)Shawn Rivers, CT D11 - District 11 Materials Laboratory01/15/202601/15/2026
Yes
01/21/2026RAP Does Not Comply Public - Test Data Visible
2025-10-27-51-4AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory01/15/202601/14/2026
Yes
01/15/2026RAPPublic - Test Data Visible
2025-10-27-51-5AASHTO T209-12: Standard Method of Test for Theoretical Maximum Specific Gravity (Gmm) and Density of Asphalt Mixtures (Maximum Specific Gravity)Shawn Rivers, CT D11 - District 11 Materials Laboratory01/15/202601/14/2026
Yes
01/15/2026CompliesPublic - Test Data Visible
2025-10-27-51-6CTM 389-19: Method of Test for Hamburg Wheel-Track Testing of Compacted Hot Mix AsphaltDaniel Smith, CT D11 - District 11 Materials Laboratory01/22/202601/22/2026
Yes
01/27/2026Complies Target < 12.7 mm Tested an Avg of 4.55 mmPublic - Test Data Visible

Sample File Attachments

File NameExtensionDate UploadedActions
No results found.

Test File Attachments


DIME Test ID: 2025-10-27-51-1 AASHTO T308-25 (Verified)
DIME Test ID: 2025-10-27-51-2 AASHTO T275-07r12 (Verified)
DIME Test ID: 2025-10-27-51-3 AASHTO T308-10 (Verified)
DIME Test ID: 2025-10-27-51-4 AASHTO T209-12 (Verified)
DIME Test ID: 2025-10-27-51-5 AASHTO T209-12 (Verified)
DIME Test ID: 2025-10-27-51-6 CTM 389-19 (Verified)