Summary for Test 2020-11-23-4-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 214775 DEA: 081F13U4 EFIS: 0819000074 |
---|---|
DIST-CO-RTE-PM | 08-SBD-62,95-122.0/142.7,9.7/33.6 |
Award Date | 05/04/2020 |
Closeout Date | 06/30/2021 |
Work Description | COLD-IN PLACE RECYCLING AND PLACE RHMA-G. |
Location Description | SAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD |
QA Service Level | 1 (Verified on 08/14/2020) |
Sample Information
Sample Taken Date | 11/23/2020 | Sample Unique Key | 4 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/24/2020 |
Sample type | Verification | A brief description of the sample | 30K MS 1/2 RHMA-G-SP 0.5% LAS |
The quantity of what the sample constitutes | 2 Bags Coldfeed Agg.,3 Bags Of Agg. | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Matthew | Last name of sampler or witnessed by | McLuckie |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0676G-20 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Granite Construction Company Indio | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0072 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G-SP | The fabricator/manufacturer designation for the sample | |
The plant number | 1346 | A detailed description of where the material sample was collected | Belt Cut at Granite Indio Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Lot number | 5 | |
Sublot number | 10 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-11-23-4
DIME Test ID: 2020-11-23-4-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-12-02
Test Results
Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 12/01/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 983.9 grams
Mass of the pycnometer with water (B): 674.7 grams
Mass of the oven dried sample (before pycnometer) (A): 493.5 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 493.5 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.586
Bulk specific gravity (SSD Basis): 2.621
Apparent specific gravity: 2.678
Absorption: 1.3 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/2/2020 ✔