Summary for Test 2020-09-22-17-3
Test performed: AASHTO T315-16Project Information
Project Identifiers | Project ID: 214907 DEA: 101K4204 EFIS: 1019000103 |
---|---|
DIST-CO-RTE-PM | 10-MER,STA-165-30.6/36.7,0.0/1.6 |
Award Date | 06/09/2020 |
Closeout Date | 04/14/2021 |
Work Description | COLD PLANE AC PAVEMENT, RESURFACE WITH RHMA, AND MICRO-SURFACING. |
Location Description | MERCED COUNTY IN AND NEAR HILMAR FROM MERCED RIVER BRIDGE TO STANISLAUS COUNTY LINE AND IN STANISLAUS COUNTY NEAR TURLOCK FROM MERCED COUNTY LINE TO ROUTE 99/165 SEPARATION |
QA Service Level | 1 (Verified on 04/28/2020) |
Sample Information
Sample Taken Date | 09/22/2020 | Sample Unique Key | 17 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/25/2020 |
Sample type | Department Acceptance | A brief description of the sample | PG 64-16 Asphalt Binder #5(034056) Test |
The quantity of what the sample constitutes | 1 can | From where was the sample collected | Source |
First name of sampler or witnessed by | M | Last name of sampler or witnessed by | Cozad |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | FNF AC INDUSTRIES | Transportation Laboratory (TL) Number | 034056 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
---|---|---|---|
Modified | No | Lot number | 1 |
Sublot number | 2 | Tank number | Not set |
Time of sample | Not set | HMA Supplier | Not set |
Certified Asphalt Supplier | Not set | Multigrade | Not set |
Multigrade Type | Not set | Asphalt Binder Mix Number | Not set |
Test Details
DIME Sample ID: 2020-09-22-17
DIME Test ID: 2020-09-22-17-3
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2020-10-05
Test Results
Phase: Original binder
Input Type: Measured
Tester's full name: Doug Ruff
Date of test: 10/05/2020
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.164 kPa
Phase Angle (δ) (for the 10 cycles): 87.3 degree
Complex Modulus (G*) (for the 10 measurements): 1.369 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.37 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 standard specifications
Test was verified on 10/5/2020 ✔