Summary for Test 2020-09-23-21-7
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 215186 DEA: 051M6504 EFIS: 0520000046 |
---|---|
DIST-CO-RTE-PM | 05-SCR-1,9,236-various, Various |
Award Date | 08/26/2020 |
Closeout Date | 09/02/2022 |
Work Description | Not set |
Location Description | Not set |
QA Service Level | 1 (Verified on 09/14/2020) |
Sample Information
Sample Taken Date | 09/23/2020 | Sample Unique Key | 21 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2020 |
Sample type | Informational | A brief description of the sample | Pile 8 and 10 web and flange |
The quantity of what the sample constitutes | 4 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Mike | Last name of sampler or witnessed by | Mullins |
Title of sampler | MREA | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | NA | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | SMTL TM6 - Steel Check Sample Plate | Heat Number(s) | NA |
---|---|---|---|
Material Specification | A36 | Grade | NA |
Thickness | 0.5 inch | Shape | Round |
Metal Foundry Manufacturer (Mill) | NA | Plate Dimension | NA |
Test Details
DIME Sample ID: 2020-09-23-21
DIME Test ID: 2020-09-23-21-7
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2020-09-28
Test Results
Number of Samples: 8
Input Type: Calculated
Tester's full name: fsaylor
Date of test: 09/28/2020
UTM: 67kip
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 10FA | 0.248 | 0.04831 | 48366 | 67850 | 35.1 | fsaylor | |
2 | 10FB | 0.248 | 0.04831 | 44505 | 68148 | 33.9 | fsaylor | |
3 | 8FA | 0.252 | 0.04988 | 45880 | 68865 | 34.6 | fsaylor | |
4 | 8FB | 0.248 | 0.04831 | 49415 | 70089 | 34.6 | fsaylor | |
5 | 10WA | 0.25 | 0.04909 | 46415 | 68604 | 34.6 | fsaylor | |
6 | 10WB | 0.253 | 0.05027 | 43976 | 67768 | 35.8 | fsaylor | |
7 | 8WA | 0.251 | 0.04948 | 46678 | 70238 | 34.8 | fsaylor | |
8 | 8WB | 0.253 | 0.05027 | 44607 | 67554 | 36.6 | fsaylor |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 9/28/2020 ✔