Summary for Test 2020-09-09-14-6
Test performed: AASHTO T313-19Project Information
Project Identifiers | Project ID: 214876 DEA: 060W7604 EFIS: 0617000279 |
---|---|
DIST-CO-RTE-PM | 06-KER,TUL-63,65,216-Var |
Award Date | 04/30/2020 |
Closeout Date | 04/29/2021 |
Work Description | COLD PLANE ASPHALT CONCRETE PAVEMENT AND PLACE RHMA-G. |
Location Description | KERN AND TULARE COUNTIES AT VARIOUS LOCATIONS |
QA Service Level | 1 (Verified on 04/21/2020) |
Sample Information
Sample Taken Date | 09/09/2020 | Sample Unique Key | 14 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/11/2020 |
Sample type | Department Acceptance | A brief description of the sample | #1 test |
The quantity of what the sample constitutes | 1 Can | From where was the sample collected | Source |
First name of sampler or witnessed by | Gurjit | Last name of sampler or witnessed by | Litt |
Title of sampler | TET | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | deer creek asphalt | Transportation Laboratory (TL) Number | 865166 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphalt Binder | Performance Grade | PG 64-16 |
---|---|---|---|
Modified | No | Lot number | |
Sublot number | Tank number | Not set | |
Time of sample | Not set | HMA Supplier | Not set |
Certified Asphalt Supplier | Not set | Multigrade | Not set |
Multigrade Type | Not set | Asphalt Binder Mix Number | Not set |
Test Details
DIME Sample ID: 2020-09-09-14
DIME Test ID: 2020-09-09-14-6
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2020-09-25
Test Results
Input Type: Measured
Tester's full name: Sunday Agude
Date of test: 09/23/2020
Minimum test bath temperature at 240 s: 0.0 C
Maximum test bath temperature at 240 s: 0.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 0.0 mN
Beam deflection 60.0 s: 0.000 µm
Measured Stiffness Modulus 60.0 s: 90.300 mPa
Estimated Stiffness Modulus 60.0 s: 0.000 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.360
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/25/2020 ✔