Summary for Test 2020-06-11-58-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213887 DEA: 024H2604 EFIS: 0218000100 |
---|---|
DIST-CO-RTE-PM | 02-SIS-97-R11.5/17.1 |
Award Date | 03/15/2019 |
Closeout Date | 01/04/2021 |
Work Description | COLD PLANE AC, REPLACE AC SURFACING, PLACE AC, RUMBLE STRIP & STRIPE. |
Location Description | SISKIYOU COUNTY ABOUT 12 MILES NORTH OF WEED FROM YELLOW BUTTE ROAD TO 0.6 MILE NORTH OF DEER MOUNTAIN ROAD |
QA Service Level | 1 (Verified on 04/03/2019) |
Sample Information
Sample Taken Date | 06/11/2020 | Sample Unique Key | 58 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/11/2020 |
Sample type | Verification | A brief description of the sample | 1/2-inch Type A Treated Virgin Aggregate |
The quantity of what the sample constitutes | JMF | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Ashton | Last name of sampler or witnessed by | Erickson |
Title of sampler | RMC QC | Telephone number of sampler | |
Laboratory sample identification | D78474A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Truax Plant | Transportation Laboratory (TL) Number | 990769 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-47-0037 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Cold Feed | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | JMF 19-24-S3 | Lot number | |
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-06-11-58
DIME Test ID: 2020-06-11-58-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-09-17
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Arthur Mills
Date of test: 07/28/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
3478.7 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
57.0 grams | 98.4 % | |||||
334.0 grams | 90.4 % | |||||
763 grams | 78.1 % | |||||
1328.0 grams | 61.8 % | |||||
198.1 grams | 37.9 % | |||||
302.3 grams | 25.3 % | |||||
367.7 grams | 17.4 % | |||||
409.4 grams | 12.4 % | |||||
439.3 grams | 8.8 % | |||||
463.7 grams | 5.86 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/17/2020 ✔