Summary for Test 2020-07-20-2-10

Test performed: CTM 202-November 2011
Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.

Project Information

Project IdentifiersProject ID: 214775
DEA: 081F13U4
EFIS: 0819000074
DIST-CO-RTE-PM08-SBD-62,95-122.0/142.7,9.7/33.6
Award Date05/04/2020
Closeout Date06/30/2021
Work DescriptionCOLD-IN PLACE RECYCLING AND PLACE RHMA-G.
Location DescriptionSAN BERNARDINO COUNTY ON ROUTE 62 FROM 3.8 MILES WEST OF ROUTE 95 TO ARIZONA STATE LINE AND ON ROUTE 95 FROM ROUTE 62 TO 2.0 MILES SOUTH OF TURTLE MOUNTAIN ROAD
QA Service Level1 (Verified on 08/14/2020)

Sample Information

Sample Taken Date07/20/2020 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/21/2020
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R25 0.50% LAS
The quantity of what the sample constitutes 12 Bags Agg., 1 Bag Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byLarry Mike Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0447A-20 Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite-Indio Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0072
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number1535 A detailed description of where the material sample was collectedBelt Cut at Granite Indio Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2020-07-20-2
DIME Test ID: 2020-07-20-2-10
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-07-27

Test Results


What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Juan/Satish Jain
Date of test: 07/24/2020
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 97 %
Cumulative percent passing the 1/2 in. sieve: 83 %
Cumulative percent passing the 3/8 in. sieve: 74 %
Cumulative percent passing the #4 sieve: 42 %
Cumulative percent passing the #8 sieve: 28 %
Cumulative percent passing the #16 sieve: 18 %
Cumulative percent passing the #30 sieve: 12 %
Cumulative percent passing the #50 sieve: 8 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 3.9 %
General comments (publicly viewable) (Max 1000 characters): Combined RAP/Virgin Aggregate Gradation w/Correlation Factors Applied

Test was verified on 7/27/2020

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.