Summary for Test 2020-07-17-6-4
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 214466 DEA: 081F1414 EFIS: 0815000231 |
---|---|
DIST-CO-RTE-PM | 08-RIV-15-15-54.2/54.3 |
Award Date | 01/02/2020 |
Closeout Date | 05/26/2022 |
Work Description | Slab & lane replacement with JPCP & precast conc pavement, place HMA. |
Location Description | Riverside and San Diego County |
QA Service Level | 1 (Verified on 03/20/2020) |
Sample Information
Sample Taken Date | 07/17/2020 | Sample Unique Key | 6 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/20/2020 |
Sample type | Verification | A brief description of the sample | PSUE 3/8" HMA-A SP R 15 0.50% LAS |
The quantity of what the sample constitutes | 6 Bags Coldfeed Agg., 3 Bags Rap | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | California Commercial Asphalt Lake Elsinore | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0443A-20 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | California Commercial Asphalt - Lake Elsinore | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0098, 91-33-0011 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | 53891193 | A detailed description of where the material sample was collected | Belt Cut at California Commercial Asphalt Lake Elsinore Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 3/8 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-07-17-6
DIME Test ID: 2020-07-17-6-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2020-07-27
Test Results
Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 07/22/2020
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 963.6 grams
Mass of the pycnometer with water (B): 655.1 grams
Mass of the oven dried sample (before pycnometer) (A): 489.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 489.1 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.554
Bulk specific gravity (SSD Basis): 2.611
Apparent specific gravity: 2.708
Absorption: 2.2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/27/2020 ✔