Summary for Test 2020-03-11-41-5
Test performed: ASTM C88-5Project Information
| Project Identifiers | Project ID: 9999 DEA: 00000000 EFIS: 0000000000 COOP: 99999333399 MINOR: 333333 Permit Numbers: 555555 0400NRT0000 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME DEVELOPERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | 1 (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 03/11/2020 | Sample Unique Key | 41 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/11/2020 |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | Washed Concrete Sand |
| The quantity of what the sample constitutes | 2 Sample Bags | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Marc | Last name of sampler or witnessed by | Segura |
| Title of sampler | Quality Control Representative | Telephone number of sampler | 9094368680 |
| Laboratory sample identification | Cemex- Moorpark -WCS | Linked DIME Sample ID | 2020-03-11-20 |
| The fabricator/manufacturer/facility name | Cemex - Moorpark | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-56-0014::MOORPARK |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | 4425 | A detailed description of where the material sample was collected | Unknown |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | fine |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-03-11-41
DIME Test ID: 2020-03-11-41-5
Testing Lab: CEMEX - Central & Southern California
Test Method: ASTM C88-5: Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
Test Release Date: 2020-07-06
Test Results
What size aggregate is being tested?: Fine Aggregate
Input Type: Calculated
Tester's full name: Marc Segura
Date of test: 03/12/2020
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Mass of sample retained on the #4 sieve (before immersion): 100.1 grams
Mass of sample retained on the #8 sieve (before immersion): 100.1 grams
Mass of sample retained on the #16 sieve (before immersion): 100.1 grams
Mass of sample retained on the #30 sieve (before immersion): 100.1 grams
Mass of sample retained on the #50 sieve (before immersion): 100.1 grams
Percent loss from sample retained on the No. 4 x 8 sieve (fine): 0 %
Percent loss from sample retained on the No. 8 x 16 sieve: 0 %
Percent loss from sample retained on the No. 16 x 30 sieve: 0 %
Percent loss from sample retained on the No. 30 x 50 sieve: 0 %
Percent loss from sample retained on the #50 sieve: 0 %
General comments (publicly viewable) (Max 1000 characters): CEMEX-MOORPARK-WCS / CALTRANS AML
DIME SAMPLE ID #2020-03-11-24
Test was verified on 7/6/2020 ✔