Summary for Test 2020-04-20-28-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 214589 DEA: 020J1604 |
---|---|
DIST-CO-RTE-PM | 02-PLU-284-0.0/8.3 |
Award Date | 02/11/2020 |
Closeout Date | 10/06/2020 |
Work Description | PLACE HMA (TYPE A), PRECOATED AGGREGATE (SEAL COAT), HMA (LEVELING). |
Location Description | PLUMAS COUNTY NEAR CHILCOOT FROM ROUTE 70 TO 1 MILE NORTH OF LITTLE LAST CHANCE CREEK BRIDGE NUMBER 09-0072 |
QA Service Level | 1 (Verified on 01/22/2020) |
Sample Information
Sample Taken Date | 04/20/2020 | Sample Unique Key | 28 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/21/2020 |
Sample type | Verification | A brief description of the sample | Washed Dust Sized Untreated Virgin Aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
First name of sampler or witnessed by | Jimmy | Last name of sampler or witnessed by | Montana |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78406D | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Ward Lake Pit | Transportation Laboratory (TL) Number | 733181 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-18-0008 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Sized Untreated Aggregate Stockpile |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | fine |
The concrete mix design number | JMF 20-04-S1 | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-04-20-28
DIME Test ID: 2020-04-20-28-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-06-12
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Karen Spliethof
Date of test: 04/23/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
634.4 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
9 grams | 98.6 % | |||||
60.9 grams | 90.4 % | |||||
200.5 grams | 58.8 % | |||||
341.4 grams | 36.6 % | |||||
436.5 grams | 21.6 % | |||||
500.9 grams | 11.4 % | |||||
539.6 grams | 5.3 % | |||||
552.2 grams | 3.36 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/12/2020 ✔