Summary for Test 2019-12-01-24-1

Test performed: CTM 202-November 2011
Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.

Project Information

Project IdentifiersProject ID: 66666
DEA: APP
EFIS: 0019000052
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date12/01/2019 Sample Unique Key24
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/06/2020
Sample typeAggregate Prequalification Program A brief description of the sampleConcrete
The quantity of what the sample constitutes2 buckets From where was the sample collectedSource
First name of sampler or witnessed byJordan Last name of sampler or witnessed byBaker
Title of sampler Telephone number of sampler
Laboratory sample identification20-APPC-0042 Linked DIME Sample ID2019-12-01-1
The fabricator/manufacturer/facility nameDeer Creek Rock and Aspahlt Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-54-0021::DEER CREEK ASPHALT
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedStockpile sample by loader bucket
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2019-12-01-24
DIME Test ID: 2019-12-01-24-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2020-05-01

Test Results


What size aggregate is being tested?: 1 in. x No. 4 - Coarse Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Bang Nguyen
Date of test: 04/07/2020
Total mass of material in the sample: 10751.8 grams
Cumulative mass retained on the 1 1/2 in. sieve: 0 grams
Cumulative mass retained on the 1 in. sieve: 261.9 grams
Cumulative mass retained on the 3/4 in. sieve: 2788.8 grams
Cumulative mass retained on the 1/2 in. sieve: 7078.4 grams
Cumulative mass retained on the 3/8 in. sieve: 9017.9 grams
Cumulative mass retained on the #4 sieve: 10530.9 grams
Cumulative mass retained on the #8 sieve: 0 grams
Cumulative mass retained on the pan: 10751.8 grams
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 98 %
Cumulative percent passing the 3/4 in. sieve: 74 %
Cumulative percent passing the 1/2 in. sieve: 34 %
Cumulative percent passing the 3/8 in. sieve: 16 %
Cumulative percent passing the #4 sieve: 2 %
Cumulative percent passing the #8 sieve: 100 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/1/2020

Warning: The test results shown on this page have been superseded and are invalid. This information is for reference only.