Summary for Test 2020-04-01-5-8
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 66667 DEA: JMFPP EFIS: 0019000043 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for submitting Sample information for JMF Prequalification Program. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/01/2020 | Sample Unique Key | 5 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | No | Date that the sample was received by the laboratory/organization performing the testing | 04/01/2020 |
Sample type | Verification | A brief description of the sample | 1/2" aggregate for RHMA-G JMF |
The quantity of what the sample constitutes | 1/2" Combined Aggregate | From where was the sample collected | Source |
First name of sampler or witnessed by | Ed | Last name of sampler or witnessed by | Gamboa |
Title of sampler | MREA | Telephone number of sampler | 2094977814 |
Laboratory sample identification | 20-JMF-0041 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Vulcan Materials | Transportation Laboratory (TL) Number | 032251 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-01-0010::CALMAT/PLEASANTON |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Belt | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2020-04-01-5
DIME Test ID: 2020-04-01-5-8
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2020-04-13
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Jay Horton
Date of test: 04/10/2020
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2216 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
93.5 grams | 95.8 % | |||||
377.5 grams | 83 % | |||||
1233.6 grams | 44.3 % | |||||
231.6 grams | 23.5 % | |||||
332.9 grams | 14.4 % | |||||
382.8 grams | 10 % | |||||
418.6 grams | 6.7 % | |||||
446.8 grams | 4.2 % | |||||
462.5 grams | 2.8 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/13/2020 ✔