Summary for Test 2020-01-17-2-2
Test performed: ASTM D412-06a-re13Project Information
| Project Identifiers | Project ID: 214392 DEA: 100H4804 EFIS: 1012000193 |
|---|---|
| DIST-CO-RTE-PM | 10-STA-108-33.1/33.4 |
| Award Date | 11/13/2019 |
| Closeout Date | 03/08/2021 |
| Work Description | COLD PLANE AC SURFACING, HMA (TYPE A) RESURFACING, AND BRIDGE REPAIR. |
| Location Description | STANISLAUS COUNTY IN RIVERBANK FROM 0.1 MILE WEST OF EIGHTH STREET TO 0.1 MILE EAST OF CLAUS ROAD |
| QA Service Level | 1 (Verified on 09/13/2019) |
Sample Information
| Sample Taken Date | 01/17/2020 | Sample Unique Key | 2 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/21/2020 |
| Sample type | Quality Assurance | A brief description of the sample | elastomeric bearing pad |
| The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Howard | Last name of sampler or witnessed by | Sternberg |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Scougal Rubber | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 18496-1 |
|---|---|---|---|
| Material/Compound/Elastomer ID | na | Samples Representing | 7 |
| Description (size) | 3x10x12 | Comments | Unknown |
| Description (Number of Shims) | 6 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
| Batch Number | na |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2020-01-17-2
DIME Test ID: 2020-01-17-2-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2020-01-28
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: lbf per sqr in
Input Type: Calculated
Tester's full name: randelin
Date of test: 01/23/2020
UTM: 2kip
Humidity: 50.00 %
Temperature: 72 F
Sample 1 Median Thickness: 0.075
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2636.97 lbf/in^2
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.072
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2671.04 lbf/in^2
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.075
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2672.36 lbf/in^2
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2671 lbf/in^2
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Sample 3
Source: Bluehill Data Point File
Test graph for Sample 1
Source: Bluehill Data Point File
Test graph for Sample 2
Test was verified on 1/28/2020 ✔