Summary for Test 2019-12-16-1-2
Test performed: ASTM D412-06a-re13Project Information
Project Identifiers | Project ID: 214231 DEA: 051M1704 EFIS: 0519000077 |
---|---|
DIST-CO-RTE-PM | 05-SLO-1-71.5/72, 71.5/72.0 |
Award Date | 04/17/2019 |
Closeout Date | 08/17/2022 |
Work Description | Polar Star Emergency wall and viaduct; NOTE ON FUNDING: This is an emergency project, per PM, METS (unit 3652) is covered for work on this project under WBS 270.44. Any issues with funding please notify METS Rep. |
Location Description | Not set |
QA Service Level | 1 (Verified on 06/28/2019) |
Sample Information
Sample Taken Date | 12/16/2019 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/06/2020 |
Sample type | Acceptance | A brief description of the sample | 1x8x12 Bearing Pad |
The quantity of what the sample constitutes | 32 | From where was the sample collected | Source |
First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Muser |
Title of sampler | QA | Telephone number of sampler | 9165170532 |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Scougal Rubber | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | S19-450-19 | Structure unique identifier | |
Structure name |
Material Information
Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 18465-1 |
---|---|---|---|
Material/Compound/Elastomer ID | 55 Duo | Samples Representing | 32 |
Description (size) | 1x8x12 | Comments | |
Description (Number of Shims) | 2 | Type of Bearing Pad | Steel |
Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
Batch Number | 18465-1 |
Test Details
DIME Sample ID: 2019-12-16-1
DIME Test ID: 2019-12-16-1-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2020-01-14
Test Results
Number of specimens tested: 5
Unit of the Ultimate Tensile Values: lbf per sqr in
Input Type: Calculated
Tester's full name: randelin
Date of test: 01/08/2020
UTM: 2kip
Humidity: 50.00 %
Temperature: 72 F
Sample 1 Median Thickness: 0.073
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2861.01 lbf/in^2
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.075
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 2785.61 lbf/in^2
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.074
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 2128.24 lbf/in^2
Sample 3 Elongation (350% Min): Pass
Sample 4 Median Thickness: 0.083
Sample 4 Thickness all Within 0.003 inch?: Yes
Sample 4 Ultimate Tensile: 2942.08 lbf/in^2
Sample 4 Elongation (350% Min): Pass
Sample 5 Median Thickness: 0.082
Sample 5 Thickness all Within 0.003 inch?: Yes
Sample 5 Ultimate Tensile: 2804.39 lbf/in^2
Sample 5 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 2804.4 lbf/in^2
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Bluehill Data Point FileTest graph for Sample 1
Source: Bluehill Data Point File
Test graph for Sample 4
Source: Bluehill Data Point File
Test graph for Sample 2
Source: Bluehill Data Point File
Test graph for Sample 3
Source: Bluehill Data Point File
Test graph for Sample 5
Test was verified on 1/14/2020 ✔