Summary for Test 2019-10-28-23-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 10/28/2019 | Sample Unique Key | 23 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 10/30/2019 |
Sample type | Quality Assurance | A brief description of the sample | 3.75 elastomeric joint seal |
The quantity of what the sample constitutes | 550ft | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0319382 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | 72 |
Humidity | 50 | Comments | Unknown |
Joint Seal Size | 3.75 |
Test Details
DIME Sample ID: 2019-10-28-23
DIME Test ID: 2019-10-28-23-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-11-19
Test Results
Input Type: Calculated
Tester's full name: Rheanna Andelin
Date of test: 11/18/2019
UTM: 11KIP
Temperature: 72 f
Humidity: 50 %
Spec Minimum Uncompressed Width: 3.78 in
Area (5 Times of the Height of Contact Face): 18.135 sqin
Half of the Spec Minimum Uncompressed Width: 1.89 in
85 Percent of the Spec Minimum Uncompressed Width: 3.627 in
3 Times of the Area: 0 sqin
4 Times of the Load at W1: 0 lbs
W1 (US Units): 3.2 in
W1 (Metric Units): 81.29 millimeters
W2 (US Units): 1.59 in
W2 (Metric Units): 40.4 millimeters
Satisfactory of MR of (US Units): 1.6099 in
Satisfactory of MR of (Metric Units): 40.89 millimeters
Optional W1 Measurement 1: 0 in
Optional W1 Measurement 2: 0 sqin
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 11/19/2019 ✔