Summary for Test 2019-07-25-14-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213877 DEA: 060X8904 EFIS: 0618000179 |
---|---|
DIST-CO-RTE-PM | 06-KIN-41-0.0/11.5 |
Award Date | 03/15/2019 |
Closeout Date | 04/16/2021 |
Work Description | COLD PLANE AC PAVEMENT AND PLACE RHMA TYPE G. |
Location Description | KINGS COUNTY ABOUT 6.5 MILES SOUTH OF KETTLEMAN CITY FROM KERN COUNTY LINE TO 0.1 MILE SOUTH OF UTICA AVENUE |
QA Service Level | 1 (Verified on 04/11/2019) |
Sample Information
Sample Taken Date | 07/25/2019 | Sample Unique Key | 14 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/29/2019 |
Sample type | Per Request | A brief description of the sample | 1/2" HMA |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Source |
First name of sampler or witnessed by | SPM | Last name of sampler or witnessed by | SPM |
Title of sampler | tech | Telephone number of sampler | |
Laboratory sample identification | 19-HMA-0140 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | SPM Avenal-Plant | Transportation Laboratory (TL) Number | C816114-Lot 1-SL19 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | not supply |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Unknown | Lot number | 1 |
Sublot number | 19 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-07-25-14
DIME Test ID: 2019-07-25-14-2
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-09-04
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Ryan Kester
Date of test: 08/30/2019
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2231.4 grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
92.9 grams | 95.8 % | |||||
472.8 grams | 78.8 % | |||||
0 grams | 100 % | |||||
1373.1 grams | 38.5 % | |||||
384.3 grams | 21.3 % | |||||
574.4 grams | 12.7 % | |||||
681 grams | 8 % | |||||
744 grams | 5.1 % | |||||
775.4 grams | 3.7 % | |||||
796 grams | 2.79 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 9/4/2019 ✔