Summary for Test 2019-07-29-23-4

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 214060
DEA: 073W9904
EFIS: 0717000162
DIST-CO-RTE-PM07-LA-27-0.0/10.8
Award Date05/13/2019
Closeout Date06/05/2020
Work DescriptionAPPLY SLURRY SEAL TO ROADWAY
Location DescriptionLOS ANGELES COUNTY NEAR LOS ANGELES FROM ROUTE 1 TO 0.1 MILE NORTH OF CEZANNE AVENUE
QA Service Level1 (Verified on 07/05/2019)

Sample Information

Sample Taken Date07/29/2019 Sample Unique Key23
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing08/06/2019
Sample typeVerification A brief description of the sample3/4 HMA-A-SP R15
The quantity of what the sample constitutesPSE 12 bags From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Sun Valley Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0467A-19 Linked DIME Sample ID
The fabricator/manufacturer/facility nameSheldon, Boulevard, Big Rock Creek Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-19-0017, 91-19-0019, 91-19-0021
The fabricator's/manufacturer's product name for the sample3/3 HMA-A-SP R15 The fabricator/manufacturer designation for the sample220831 SVA LTR
The plant numberUnknown A detailed description of where the material sample was collectedBelt Cut at Vulcan Sun Valley Plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberUnknown Lot numberUnknown
Sublot numberUnknown JMF Verification ID

Test Details

DIME Sample ID: 2019-07-29-23
DIME Test ID: 2019-07-29-23-4
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2019-08-22

Test Results


Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 08/08/2019
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 968.1 grams
Mass of the pycnometer with water (B): 653.9 grams
Mass of the oven dried sample (before pycnometer) (A): 494.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 494.9 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.664
Bulk specific gravity (SSD Basis):2.691
Apparent specific gravity:2.739
Absorption:1 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/22/2019