Summary for Test 2019-07-16-7-2
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213650 DEA: 081E8504 EFIS: 0814000114 |
---|---|
DIST-CO-RTE-PM | 08-SBD-142-0.0/5.8 |
Award Date | 11/19/2018 |
Closeout Date | 08/28/2020 |
Work Description | COLD PLANE/OVERLAY, HMA DIKES, INSTALL MGS AND DRAINAGE FACILITIES |
Location Description | SAN BERNARDINO COUNTY IN AND NEAR CHINO HILLS FROM ORANGE COUNTY LINE TO ROUTE 142/71 SEPARATION. |
QA Service Level | 1 (Verified on 04/16/2019) |
Sample Information
Sample Taken Date | 07/16/2019 | Sample Unique Key | 7 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/17/2019 |
Sample type | Verification | A brief description of the sample | 3/4 HMA-A-SP R15 |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | All American Asphalt Corona | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0338A-19 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | All American Asphalt Corona | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-33-0005::ALL AMERICAN ASPHALT |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | 108835 |
The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Unknown |
Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-07-16-7
DIME Test ID: 2019-07-16-7-2
Testing Lab: CT D08 - Fontana Field Testing Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-07-19
Test Results
What type of gradation is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): No
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Seyed Mirgati
Date of test: 07/17/2019
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 85 %
Cumulative percent passing the 3/8 in. sieve: 65 %
Cumulative percent passing the #4 sieve: 28 %
Cumulative percent passing the #8 sieve: 16 %
Cumulative percent passing the #16 sieve: 10 %
Cumulative percent passing the #30 sieve: 5 %
Cumulative percent passing the #50 sieve: 4 %
Cumulative percent passing the #100 sieve: 3 %
Cumulative percent passing the #200 sieve: 1.4 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/19/2019 ✔