Summary for Test 2019-06-13-7-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 213738 DEA: 07303504 EFIS: 0714000007 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-23-0.0/R3.3 |
| Award Date | 01/09/2019 |
| Closeout Date | 11/02/2020 |
| Work Description | COLD PLANE & OVERLAY ASPHALT CONCRETE PAVEMENT AND UPGRADE CURB RAMPS. |
| Location Description | VENTURA COUNTY IN THOUSAND OAKS FROM CARLISLE ROAD TO ROUTE 101 |
| QA Service Level | 1 (Verified on 11/02/2020) |
Sample Information
| Sample Taken Date | 06/13/2019 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/19/2019 |
| Sample type | Verification | A brief description of the sample | 1/2 RHMA-G-SP |
| The quantity of what the sample constitutes | JMF 9 bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Vulcan Sun Valley | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0359G-19 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Sheldon, Boulevard, Big Rock Creek | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | Sheldon, Boulevard, Big Rock Creek |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 RHMA-G-SP | The fabricator/manufacturer designation for the sample | 326120 SVA3 LTR |
| The plant number | 3 | A detailed description of where the material sample was collected | Belt Cut at Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-06-13-7
DIME Test ID: 2019-06-13-7-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-08-22
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Ian Snyder
Date of test: 06/21/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 98 %
Cumulative percent passing the 3/8 in. sieve: 87 %
Cumulative percent passing the 1/4 in. sieve: 61 %
Cumulative percent passing the #4 sieve: 37 %
Cumulative percent passing the #8 sieve: 16 %
Cumulative percent passing the #16 sieve: 10 %
Cumulative percent passing the #30 sieve: 7 %
Cumulative percent passing the #50 sieve: 4 %
Cumulative percent passing the #100 sieve: 2 %
Cumulative percent passing the #200 sieve: 1.1 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/22/2019 ✔