Summary for Test 2019-06-20-19-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 210569 DEA: 083555V4 EFIS: 0814000086 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-15-42.5/46.0 |
| Award Date | 11/05/2015 |
| Closeout Date | 01/18/2022 |
| Work Description | WIDEN I-15, RECONSTRUCT 3 IC'S, CONSTRUCT 2 NEW BR AND WIDEN 3 BR. |
| Location Description | SAN BERNARDINO COUNTY IN VICTORVILLE FROM 0.5 MILE NORTH OF MOJAVE DRIVE TO 1.5 MILE NORTH OF STODDARD WELLS ROAD OVERCROSSING |
| QA Service Level | 1 (Verified on 10/15/2015) |
Sample Information
| Sample Taken Date | 06/20/2019 | Sample Unique Key | 19 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/26/2019 |
| Sample type | Verification | A brief description of the sample | 1 HMA-A-SP R20 |
| The quantity of what the sample constitutes | JMF 18 Bags | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Blue Diamond Victorville | Last name of sampler or witnessed by | QC |
| Title of sampler | Telephone number of sampler | ||
| Laboratory sample identification | 0378A-19 | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Agcon-Oro Grande, Cemex-White Mountain | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-36-0046, 91-36-0106 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1 HMA-A-SP R20 | The fabricator/manufacturer designation for the sample | 300222 WM R20 |
| The plant number | Unknown | A detailed description of where the material sample was collected | Belt Cut at Plant |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | Unknown | Lot number | Unknown |
| Sublot number | Unknown | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-06-20-19
DIME Test ID: 2019-06-20-19-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-08-22
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Danilo Ferrer
Date of test: 07/05/2019
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 86 %
Cumulative percent passing the 1/2 in. sieve: 67 %
Cumulative percent passing the 3/8 in. sieve: 64 %
Cumulative percent passing the 1/4 in. sieve: 64 %
Cumulative percent passing the #4 sieve: 49 %
Cumulative percent passing the #8 sieve: 36 %
Cumulative percent passing the #16 sieve: 25 %
Cumulative percent passing the #30 sieve: 16 %
Cumulative percent passing the #50 sieve: 8 %
Cumulative percent passing the #100 sieve: 3 %
Cumulative percent passing the #200 sieve: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/22/2019 ✔