Summary for Test 2019-05-22-5-1
Test performed: ASTM C39-10Project Information
| Project Identifiers | Project ID: 209695 DEA: 08347704 EFIS: 0800000616 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-SR-58-0/12.9 |
| Award Date | 11/10/2017 |
| Closeout Date | 01/14/2021 |
| Work Description | (Alternative Delivery) The CMGC project will upgrade SR 58 from 2- to 4-lanes in San Bernardino County from the Kern County line to 7.5 miles east of US-395. |
| Location Description | SR-58 / 395 Kramer Junction project. In San Bernardino County from the Kern County line to 7.5 miles east of US-395. |
| QA Service Level | 1 (Verified on 12/01/2017) |
Sample Information
| Sample Taken Date | 05/22/2019 | Sample Unique Key | 5 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/18/2019 |
| Sample type | Quality Assurance | A brief description of the sample | 6x12 concrete cylinders |
| The quantity of what the sample constitutes | 4 concrete cylinders | From where was the sample collected | Job Site |
| First name of sampler or witnessed by | Philip | Last name of sampler or witnessed by | Maquiran |
| Title of sampler | TET | Telephone number of sampler | |
| Laboratory sample identification | 0976-522B | Linked DIME Sample ID | |
| The fabricator/manufacturer/facility name | Hi Grade Materials Company | Transportation Laboratory (TL) Number | 02-052219 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name | DS3 Southside Wing Walls |
Material Information
| Material Type | Concrete | The concrete mix design number | S1T172A |
|---|---|---|---|
| The truck number from where the sample was collected | 189 | The batch plant ticket number from where the sample was collected | 258901 |
| Concrete batch plant | Hi Grade Materials Company | The fabricator/manufacturer designation for the sample | Unknown |
| A detailed description of where the material sample was collected | Transit Mixer at 60 Cubic Yards Placed | Where the material sample would have been placed if not sampled | DS3 Southside Wing Walls |
| From Lot No. | Unknown | Bag Lot No. | Unknown |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2019-05-22-5
DIME Test ID: 2019-05-22-5-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: ASTM C39-10: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2019-06-20
Test Results
Unit system used?: US Units
Number of specimens: 2
Test performed: With no density determined
Input Type: Measured
Tester's full name: MM
Date of test: 06/19/2019
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 6.00 in
Average diameter of cylinder 2: 6.01 in
Maximum load on cylinder 1: 165850 lb
Maximum load on cylinder 2: 161730 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 3
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Age of specimen: 28 days
Cross sectional area of cylinder 1: 28.27 in^2
Cross sectional area of cylinder 2: 28.37 in^2
Compressive strength of cylinder 1: 5866.6 psi
Compressive strength of cylinder 2: 5700.7 psi
Compressive strength (to nearest 10 psi): 5780 psi
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/20/2019 ✔