Summary for Test 2019-05-09-8-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 213336 DEA: 023E7404 EFIS: 0200020160 |
---|---|
DIST-CO-RTE-PM | 02-SHA-299-R7.6/18.3 |
Award Date | 08/24/2018 |
Closeout Date | 09/02/2020 |
Work Description | PAVEMENT PRESERVATION |
Location Description | SHASTA COUNTY AT AND NEAR SHASTA FROM 0.5 MILE WEST OF CRYSTAL CREEK ROAD TO TRINITY ALLEY |
QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
Sample Taken Date | 05/09/2019 | Sample Unique Key | 8 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/13/2019 |
Sample type | Verification | A brief description of the sample | Treated, Virgin, 1/2 inch Type A |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Josh | Last name of sampler or witnessed by | Williams |
Title of sampler | Consultant | Telephone number of sampler | |
Laboratory sample identification | D77878A | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Shasta Ranch Aggregates | Transportation Laboratory (TL) Number | 001909 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057::SHASTA RANCH AGGREGATES |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | L190278 |
The plant number | Unknown | A detailed description of where the material sample was collected | Cold Feed |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | JMF 19-08-S2 | Lot number | 0 |
Sublot number | 0 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-05-09-8
DIME Test ID: 2019-05-09-8-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2019-06-13
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Arthur Mills and T. McCormick
Date of test: 05/13/2019
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
2597.7 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
96.0 grams | 96.3 % | |||||
292.0 grams | 88.8 % | |||||
828 grams | 68.1 % | |||||
1212.0 grams | 53.3 % | |||||
213.2 grams | 30.8 % | |||||
316.0 grams | 19.9 % | |||||
373.2 grams | 13.8 % | |||||
411.4 grams | 9.8 % | |||||
435.7 grams | 7.2 % | |||||
451.2 grams | 5.6 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 6/13/2019 ✔