Summary for Test 2019-04-09-12-9
Test performed: AASHTO T104-99r16Project Information
Project Identifiers | Project ID: 213720 DEA: 024H2004 EFIS: 0218000094 |
---|---|
DIST-CO-RTE-PM | 02-SHA-89-26.3/29.2 |
Award Date | 12/19/2018 |
Closeout Date | 08/06/2019 |
Work Description | PAVEMENT OVERLAY |
Location Description | SHASTA COUNTY ABOUT 10 MILES NORTH OF BURNEY FROM 0.3 MILE NORTH OF CLARK CREEK ROAD TO LAKE BRITTON BRIDGE |
QA Service Level | 1 (Verified on 01/04/2019) |
Sample Information
Sample Taken Date | 04/09/2019 | Sample Unique Key | 12 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/09/2019 |
Sample type | Quality Control | A brief description of the sample | 1/2-inch Type A Aggregate (Untreated Virgin) |
The quantity of what the sample constitutes | Mix Design | From where was the sample collected | Source |
First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | CGI |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Shaw Pit | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0008::SHAW PIT |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | 19-1278.105B |
The plant number | Unknown | A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | 19-04-S1a | Lot number | 0 |
Sublot number | 0 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-04-09-12
DIME Test ID: 2019-04-09-12-9
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2019-05-13
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: CGI
Date of test: 04/09/2019
Percentage of 2 ½ x 1 ½ material loss: 2 %
Percentage of 1 ½ x ¾ inch material loss: 2 %
Percentage of ¾ x ⅜ inch material loss: 2 %
Percentage of ⅜ inch x No. 4 material loss: 2 %
Percentage of No. 4 x 8 material loss: 2 %
Percentage of No. 8 x 16 material loss: 2 %
Percentage of No. 16 x 30 material loss: 2 %
Percentage of No. 30 x 50 material loss: 2 %
Coarse weighted average loss: 2 %
Fine weighted average loss: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/13/2019 ✔