Summary for Test 2019-03-20-13-9
Test performed: AASHTO T104-99r16Project Information
Project Identifiers | Project ID: 213469 DEA: 024C40V4 EFIS: 0218000125 |
---|---|
DIST-CO-RTE-PM | 02-SHA-5-R3.8/R11.7 |
Award Date | 11/06/2018 |
Closeout Date | 08/16/2023 |
Work Description | WIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB |
Location Description | SHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING |
QA Service Level | 1 (Verified on 12/31/2018) |
Sample Information
Sample Taken Date | 03/20/2019 | Sample Unique Key | 13 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/20/2019 |
Sample type | Quality Control | A brief description of the sample | 1/2-inch OGFC Untreated Aggregate |
The quantity of what the sample constitutes | Mix Design | From where was the sample collected | Source |
First name of sampler or witnessed by | CGI | Last name of sampler or witnessed by | CGI |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Fawndale Rock Quarry | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0017::FAWNDALE ROCK QUARRY |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | 19-1001.314 |
The plant number | Unknown | A detailed description of where the material sample was collected | Lab-Batched from Sized Untreated Aggregate Stockpiles |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | JMF 19-03-S1 | Lot number | 0 |
Sublot number | 0 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2019-03-20-13
DIME Test ID: 2019-03-20-13-9
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2019-04-12
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Freshly prepared
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: CGI
Date of test: 03/20/2019
Percentage of 2 ½ x 1 ½ material loss: 0 %
Percentage of 1 ½ x ¾ inch material loss: 0 %
Percentage of ¾ x ⅜ inch material loss: 2 %
Percentage of ⅜ inch x No. 4 material loss: 2 %
Percentage of No. 4 x 8 material loss: 2 %
Percentage of No. 8 x 16 material loss: 2 %
Percentage of No. 16 x 30 material loss: 2 %
Percentage of No. 30 x 50 material loss: 2 %
Coarse weighted average loss: 2 %
Fine weighted average loss: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/12/2019 ✔