Summary for Test 2019-03-06-2-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date03/06/2019 Sample Unique Key2
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/08/2019
Sample typeQuality Assurance A brief description of the samplejoint seal
The quantity of what the sample constitutes600' From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0619157
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size5"

Test Details

DIME Sample ID: 2019-03-06-2
DIME Test ID: 2019-03-06-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-03-27

Test Results


Input Type: Measured
Tester's full name: Steve
Date of test: 03/12/2019
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 123.921 lbs
Width at 4 x Load at W1: 2.12633 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.1325 in
Measured Minimum Uncompressed Width: 5.009 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.07 in
Height of Contact Face: 4.9595 in
Length: no data
Spec Minimum Uncompressed Width: 5.009 in
Area (5 Times of the Height of Contact Face): 24.798 sqin
Half of the Spec Minimum Uncompressed Width: 2.535 in
85 Percent of the Spec Minimum Uncompressed Width: 4.25765 in
3 Times of the Area: 74.394 sqin
4 Times of the Load at W1: 495.686 in
W1 (US Units): 4.258 in
W1 (Metric Units): 108.144 millimeters
W2 (US Units): 2.126 in
W2 (Metric Units): 54.009 millimeters
Satisfactory of MR of (US Units): 2.131 in
Satisfactory of MR of (Metric Units): 54.136 millimeters
Optional W1 Measurement 1: 4.2577 in
Optional W1 Measurement 2: 74.89 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 3/20/2019