Summary for Test 2018-12-06-13-1
Test performed: CTM 214-August 2010Project Information
Project Identifiers | Project ID: 213360 DEA: 044A1104 EFIS: 0412000497 |
---|---|
DIST-CO-RTE-PM | 04--- |
Award Date | 06/20/2018 |
Closeout Date | 09/12/2019 |
Work Description | Not set |
Location Description | Not set |
QA Service Level | 1 (Verified on 09/02/2019) |
Sample Information
Sample Taken Date | 12/06/2018 | Sample Unique Key | 13 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/29/2019 |
Sample type | Annual Source Testing | A brief description of the sample | 3/8 pea gravel Aggregates |
The quantity of what the sample constitutes | 2 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | plant | Last name of sampler or witnessed by | plant |
Title of sampler | QC lab tech | Telephone number of sampler | |
Laboratory sample identification | 19-0009 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | CEMEX | Transportation Laboratory (TL) Number | C859584 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-39-0015 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Tracy |
The plant number | Unknown | A detailed description of where the material sample was collected | CEMEX KERLINGER |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 3/8 inch |
The concrete mix design number | Unknown | Lot number | 1 |
Sublot number | 1 | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2018-12-06-13
DIME Test ID: 2018-12-06-13-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2019-02-15
Test Results
What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Bang Nguyen
Date of test: 02/15/2019
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate: 1.4 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/15/2019 ✔