Summary for Test 2018-09-21-14-7
Test performed: AASHTO T308-10Project Information
| Project Identifiers | Project ID: 213182 DEA: 030C4724 EFIS: 0314000272 |
|---|---|
| DIST-CO-RTE-PM | 03-YOL-16-20.5/21.3, 28.2/31.8 |
| Award Date | 06/19/2018 |
| Closeout Date | 10/06/2021 |
| Work Description | ADD TURN LANES & ROUNDABOUT, ALIGN CURVE, WIDEN SHOULDER, CULVERT WORK |
| Location Description | YOLO COUNTY NEAR ESPARTO FROM 0.3 MILE WEST TO 0.4 MILE EAST OF COUNTY ROAD 79 AND FROM 0.1 MILE EAST OF PLAINFIELD STREET TO 0.1 MILE EAST OF COUNTY ROAD 90 |
| QA Service Level | 1 (Verified on 07/26/2018) |
Sample Information
| Sample Taken Date | 09/21/2018 | Sample Unique Key | 14 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2018 |
| Sample type | Verification | A brief description of the sample | JMF Verification |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
| First name of sampler or witnessed by | Cameron | Last name of sampler or witnessed by | Richardson |
| Title of sampler | Manager Technical Services | Telephone number of sampler | Unknown |
| Laboratory sample identification | JMF18-031 | Linked DIME Sample ID | 03JMF18-031 |
| The fabricator/manufacturer/facility name | Vulcan Materials - Madison | Transportation Laboratory (TL) Number | 783660 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | N/A | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
|---|---|---|---|
| HMA Grading | 1/2 inch | Lot number | Not set |
| Sublot number | Not set | HMA Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-09-21-14
DIME Test ID: 2018-09-21-14-7
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2018-10-15
Test Results
What temperature unit is used?: Fahrenheit
Input Type: Measured
Tester's full name: Jeff Herbert
Date of test: 10/08/2018
Test procedure used?: Method B
Mass of the specimen basket assembly: no data
Mass of the specimen and specimen basket assembly prior to ignition: no data
Mass of HMA Sample prior to ignition: 1678.6 g
Mass Loss: no data
Mass of aggregate remaining after ignition: 1535.3 g
Correction Factor (Percent by mass of HMA Specimen): 0.86 %
Moisture Content: 0 %
Temperature Compensation Factor: no data
Test Temperature: 538 F
Corrected Asphalt Binder Content: 7.68 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/8/2018 ✔