Summary for Test 2018-02-27-21-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 |
---|---|
DIST-CO-RTE-PM | 02-TEH-36-42.1/46.0 |
Award Date | 12/18/2017 |
Closeout Date | 08/07/2019 |
Work Description | COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK. |
Location Description | TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD |
QA Service Level | 1 (Verified on 05/24/2018) |
Sample Information
Sample Taken Date | 02/27/2018 | Sample Unique Key | 21 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/27/2018 |
Sample type | Verification | A brief description of the sample | Untreated Virgin 1/2-inch Type A Aggregate, Laboratory Combined |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Michael | Last name of sampler or witnessed by | Allegretto |
Title of sampler | Lab Tech | Telephone number of sampler | Unknown |
Laboratory sample identification | D77292F | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Tullis, Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 852088 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057::SHASTA RANCH AGGREGATES |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Untreated Virgin 1/2-inch Type A | The fabricator/manufacturer designation for the sample | L170860 |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpiles at Plant |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | JMF 18-01-S1 | Lot number | Not set |
Sublot number | Not set | Aggregate Mix Number | Not set |
HMA Pay | No |
Combined Gradation Report Information
Combined Gradation Report Id | Bin Index | Dime Test Id |
---|---|---|
No assigned tests for this sample. |
Test Details
DIME Sample ID: 2018-02-27-21
DIME Test ID: 2018-02-27-21-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-07-16
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: NRML-R
Date of test: 02/27/2018
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 95.6 %
Cumulative percent passing the 3/8 in. sieve: 83.9 %
Cumulative percent passing the 1/4 in. sieve: 64.8 %
Cumulative percent passing the #4 sieve: 55.7 %
Cumulative percent passing the #8 sieve: 36.4 %
Cumulative percent passing the #16 sieve: 24.1 %
Cumulative percent passing the #30 sieve: 16.4 %
Cumulative percent passing the #50 sieve: 11.4 %
Cumulative percent passing the #100 sieve: 8.1 %
Cumulative percent passing the #200 sieve: 6 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/16/2018 ✔