Summary for Test 2018-02-27-13-1
Test performed: AASHTO T27-14Project Information
| Project Identifiers | Project ID: 212679 DEA: 023E7204 EFIS: 0200020154 |
|---|---|
| DIST-CO-RTE-PM | 02-TEH-36-42.1/46.0 |
| Award Date | 12/18/2017 |
| Closeout Date | 08/07/2019 |
| Work Description | COLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK. |
| Location Description | TEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD |
| QA Service Level | 1 (Verified on 05/24/2018) |
Sample Information
| Sample Taken Date | 02/27/2018 | Sample Unique Key | 13 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/27/2018 |
| Sample type | Verification | A brief description of the sample | Virgin 1/2-inch Type A |
| The quantity of what the sample constitutes | JMF | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | Cheryl | Last name of sampler or witnessed by | Abraham |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | D77291A | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Tullis, Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 852086 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057::SHASTA RANCH AGGREGATES |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
| The plant number | Unknown | A detailed description of where the material sample was collected | Cold Feed |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | Unknown | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-02-27-13
DIME Test ID: 2018-02-27-13-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-03-27
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Sweeny/Valasek
Date of test: 02/27/2018
| Cumulative Mass Retained | Cumulative Percent Passing | |||||
|---|---|---|---|---|---|---|
| 3034.1 grams | ||||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 0.0 grams | 100 % | |||||
| 162.0 grams | 95 % | |||||
| 515.0 grams | 83 % | |||||
| 1028 grams | 66 % | |||||
| 1313.0 grams | 57 % | |||||
| 181.7 grams | 36 % | |||||
| 292.1 grams | 24 % | |||||
| 358.2 grams | 16 % | |||||
| 400.2 grams | 12 % | |||||
| 427.4 grams | 8 % | |||||
| 444.3 grams | 6.6 % | |||||
| grams | ||||||
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 3/27/2018 ✔