Summary for Test 2013-12-09-6004391-1
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 5266 DEA: 08448404 EFIS: 0800000712 COOP: 081488A1 |
---|---|
DIST-CO-RTE-PM | 08-RIV-91-15.6/21.6 |
Award Date | 02/10/2012 |
Closeout Date | 07/27/2023 |
Work Description | CONSTRUCT HOV LANES AND WIDEN BRIDGES. |
Location Description | RIVERSIDE COUNTY IN RIVERSIDE FROM ADAMS STREET TO THE ROUTE 60/215 SEPARATION |
QA Service Level | 1 (Verified on 04/27/2012) |
Sample Information
Sample Taken Date | 12/09/2013 | Sample Unique Key | 6004391 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/15/2014 |
Sample type | Acceptance | A brief description of the sample | Class 2 Aggregate Subbase |
The quantity of what the sample constitutes | 1 Bag | From where was the sample collected | Other |
First name of sampler or witnessed by | Kohnson | Last name of sampler or witnessed by | Chan |
Title of sampler | TE | Telephone number of sampler | Not set |
Laboratory sample identification | 4010B | Linked DIME Sample ID | Not set |
The fabricator/manufacturer/facility name | Not set | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Unknown |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
The plant number | Not set | A detailed description of where the material sample was collected | WB 91 Sta. 304 50 |
Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2013-12-09-6004391
DIME Test ID: 2013-12-09-6004391-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2015-02-20
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Vance Olsen
Date of test: 01/22/2014
Cumulative percent passing the 3 in. sieve: 100 %
Cumulative percent passing the 2 1/2 in. sieve: 100 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 96 %
Cumulative percent passing the 1/2 in. sieve: 81 %
Cumulative percent passing the 3/8 in. sieve: 68 %
Cumulative percent passing the #4 sieve: 46 %
Cumulative percent passing the #8 sieve: 29 %
Cumulative percent passing the #16 sieve: 21 %
Cumulative percent passing the #30 sieve: 16 %
Cumulative percent passing the #50 sieve: 12 %
Cumulative percent passing the #100 sieve: 10 %
Cumulative percent passing the #200 sieve: 8.3 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 2/20/2015 ✔