Summary for Test 2013-12-18-7304605-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 3811 DEA: 071219U4 EFIS: 0700001829 |
|---|---|
| DIST-CO-RTE-PM | 07-LA-5,170-58.0/63.4,R32.3/R33.1 |
| Award Date | 05/06/2010 |
| Closeout Date | 08/25/2016 |
| Work Description | Construct HOV lanes, connectors and replace slabs. |
| Location Description | LOS ANGELES COUNTY IN LOS ANGELES ON ROUTE 5 FROM 0.1 KM NORTH OF SHELDON STREET OVERCROSSING TO ROUTE 5/118 SEPARATION AND ON ROUTE 170 FROM 0.1 KM SOUTH OF ARLETA/SHELDON UNDERCROSSING TO ROUTE 5/170 SEPARATION |
| QA Service Level | 1 (Verified on 08/16/2012) |
Sample Information
| Sample Taken Date | 12/18/2013 | Sample Unique Key | 7304605 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/18/2013 |
| Sample type | Annual Source Testing | A brief description of the sample | WCS |
| The quantity of what the sample constitutes | 2 Bags | From where was the sample collected | Source |
| First name of sampler or witnessed by | Jeff | Last name of sampler or witnessed by | Pollard |
| Title of sampler | Supervisor of Technical Services | Telephone number of sampler | Not set |
| Laboratory sample identification | 4005B | Linked DIME Sample ID | Not set |
| The fabricator/manufacturer/facility name | Vulcan Sun Valley - Blvd. | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0019::BOULEVARD |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Not set | The fabricator/manufacturer designation for the sample | Not set |
| The plant number | Not set | A detailed description of where the material sample was collected | Stockpile |
| Where the material sample would have been placed if not sampled | Not set | Primary Aggregate Nominal Size | fine |
| The concrete mix design number | Lot number | Not set | |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2013-12-18-7304605
DIME Test ID: 2013-12-18-7304605-1
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2014-04-07
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Calculated
Tester's full name: Nemencio Daof
Date of test: 01/24/2014
Cumulative percent passing the 3/8 in. sieve: 100 %
Cumulative percent passing the #4 sieve: 98 %
Cumulative percent passing the #8 sieve: 79 %
Cumulative percent passing the #16 sieve: 60 %
Cumulative percent passing the #30 sieve: 35 %
Cumulative percent passing the #50 sieve: 15 %
Cumulative percent passing the #100 sieve: 6 %
Cumulative percent passing the #200 sieve: 3 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/7/2014 ✔