Summary for Test 2017-04-07-19-9
Test performed: AASHTO T104-99r16Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 04/07/2017 | Sample Unique Key | 19 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/07/2017 |
| Sample type | Quality Control | A brief description of the sample | Combined Half Inch Type A Untreated Virgin |
| The quantity of what the sample constitutes | JMF | From where was the sample collected | Source |
| First name of sampler or witnessed by | a | Last name of sampler or witnessed by | a |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | JMF 17-01-S1 | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Hat Creek - Shaw Pit Facility | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-25-0008 |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Combined Half Inch Type A Untreated Virgin | The fabricator/manufacturer designation for the sample | One Half inch Type A - Untreated Virgin |
| The plant number | Unknown | A detailed description of where the material sample was collected | Batched in Lab |
| Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1 inch |
| The concrete mix design number | 16-1278 72 | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2017-04-07-19
DIME Test ID: 2017-04-07-19-9
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2017-12-13
Test Results
Percentage of the total sample represented by each size
Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Ward Jenkins
Date of test: 04/07/2017
Percentage of 2 ½ x 1 ½ material loss: no data
Percentage of 1 ½ x ¾ inch material loss: no data
Percentage of ¾ x ⅜ inch material loss: no data
Percentage of ⅜ inch x No. 4 material loss: no data
Percentage of No. 4 x 8 material loss: no data
Percentage of No. 8 x 16 material loss: no data
Percentage of No. 16 x 30 material loss: no data
Percentage of No. 30 x 50 material loss: no data
Coarse weighted average loss: 2.5 %
Fine weighted average loss: 1.5 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 12/13/2017 ✔