Summary for Test 2017-11-14-8-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date11/14/2017 Sample Unique Key8
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/16/2017
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutesNA From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0717412
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size2.75

Test Details

DIME Sample ID: 2017-11-14-8
DIME Test ID: 2017-11-14-8-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-12-15

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 11/20/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 48.3266 lbs
Width at 4 x Load at W1: 1.21302 in
Nominal Width: 2.75 in
Measured Maximum Uncompressed Width: 2.8885 in
Measured Minimum Uncompressed Width: 2.761 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.793 in
Height of Contact Face: 2.843 in
Spec Minimum Uncompressed Width: 2.761 in
Area (5 Times of the Height of Contact Face): 14.215 sqin
Half of the Spec Minimum Uncompressed Width: 1.3965 in
85 Percent of the Spec Minimum Uncompressed Width: 2.34685 in
3 Times of the Area: 42.645 sqin
4 Times of the Load at W1: 193.307 in
W1 (US Units): 2.347 in
W1 (Metric Units): 59.61 millimeters
W2 (US Units): 1.213 in
W2 (Metric Units): 30.811 millimeters
Satisfactory of MR of (US Units): 1.134 in
Satisfactory of MR of (Metric Units): 28.799 millimeters
Optional W1 Measurement 1: 2.3469 in
Optional W1 Measurement 2: 42.9293 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2017-11-14-8-1

Test was verified on 12/8/2017