Summary for Test 2017-11-07-5-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 11/07/2017 | Sample Unique Key | 5 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 11/08/2017 |
Sample type | Quality Assurance | A brief description of the sample | 3.75 elastomeric joint seal |
The quantity of what the sample constitutes | 1 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Paula | Last name of sampler or witnessed by | Wilcox |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 2417403 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | na |
Humidity | na | Comments | Unknown |
Joint Seal Size | 3.75" |
Test Details
DIME Sample ID: 2017-11-07-5
DIME Test ID: 2017-11-07-5-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-11-29
Test Results
Input Type: Measured
Tester's full name: Brian
Date of test: 11/14/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 57.258 lbs
Width at 4 x Load at W1: 1.57211 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.9625 in
Measured Minimum Uncompressed Width: 3.81 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.898 in
Height of Contact Face: 3.5275 in
Length: no data
Spec Minimum Uncompressed Width: 3.81 in
Area (5 Times of the Height of Contact Face): 17.638 sqin
Half of the Spec Minimum Uncompressed Width: 1.949 in
85 Percent of the Spec Minimum Uncompressed Width: 3.2385 in
3 Times of the Area: 52.914 sqin
4 Times of the Load at W1: 229.032 in
W1 (US Units): 3.239 in
W1 (Metric Units): 82.258 millimeters
W2 (US Units): 1.572 in
W2 (Metric Units): 39.932 millimeters
Satisfactory of MR of (US Units): 1.666 in
Satisfactory of MR of (Metric Units): 42.326 millimeters
Optional W1 Measurement 1: 3.2385 in
Optional W1 Measurement 2: 53.2668 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 11/22/2017 ✔