DIME - Test Summary

Summary for Test 2017-04-20-12-1

Test performed: AASHTO T104-11

Project Identifiers	Project ID: 211083 DEA: 021H0304
DIST-CO-RTE-PM	02-SIS-161-9.0/15.0
Award Date	03/01/2016
Closeout Date	09/11/2017
Work Description	COLD IN-PLACE RECYCLE
Location Description	IN SISKIYOU COUNTY ABOUT 6 MILESWEST OF TULELAKE FROM 2.2 MILES WEST TO 3.9 MILE EAST OF FUGATE ROAD.
QA Service Level	1 (Verified on 11/30/2016)

Sample Taken Date	04/20/2017	Sample Unique Key	12
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/21/2017
Sample type	Verification	A brief description of the sample	Untreated Virgin Aggregate
The quantity of what the sample constitutes	JMF	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Contractor	Last name of sampler or witnessed by	CGI
Title of sampler	Unknown	Telephone number of sampler	Unknown
Laboratory sample identification	D76897, 17FPCC-0214	Linked DIME Sample ID	2017-04-20-11
The fabricator/manufacturer/facility name	Hat Creek - Shaw Pit Facility	Transportation Laboratory (TL) Number	847797
Inspector Lot Number from the Transportation Laboratory (TL) Form	Unknown	Structure unique identifier	Not set
Structure name	Not set

Material Type	Job Mix Formula Partial	Source Identification (SMARA, name of Pit or Job Site)	91-25-0008
The fabricator's/manufacturer's product name for the sample	1/2 inch Type A	The fabricator/manufacturer designation for the sample	16-1278.72
The plant number	Unknown	A detailed description of where the material sample was collected	Stockpiles
Where the material sample would have been placed if not sampled	Verification	Superpave or Non-superpave Mix	Superpave

DIME Sample ID: 2017-04-20-12

DIME Test ID: 2017-04-20-12-1

Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory

Test Method: AASHTO T104-11: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)

Test Release Date: 2017-07-24

What size aggregate is being tested?: Coarse Aggregate

Input Type: Calculated

Tester's full name: Benjamin Lenz

Date of test: 07/24/2017

What type of solution was used?: Sodium sulfate

What was the condition of the solution?: Previously used

Mass of sample retained on the 2 in. sieve (before immersion): 0 grams

Mass of sample retained on the 1.5 in. sieve (before immersion): 0 grams

Mass of sample retained on the 1 in. sieve (before immersion): 0 grams

Mass of sample retained on the 3/4 in. sieve (before immersion): 0 grams

Mass of sample retained on the 1/2 in. sieve (before immersion): 0 grams

Mass of sample retained on the 3/8 in. sieve (before immersion): 310.1 grams

Mass of sample retained on the #4 sieve (before immersion): 313.4 grams

Percent loss from sample retained on the 1 ½ in. x ¾ in. sieve: 0 %

Percent loss from sample retained on the ¾ in. x ⅜ in. sieve: 0 %

Percent loss from sample retained on the ⅜ in. x No. 4 sieve: 3 %

Percent loss from sample retained on the No. 4 x 8 sieve (coarse): 3 %

Percent of split particles between 3/4 in and 1 1/2 in.: 0 %

Percent of crumbled particles between 3/4 in and 1 1/2 in.: 0 %

Percent of cracked particles between 3/4 in and 1 1/2 in.: 0 %

Percent of flaked particles between 3/4 in and 1 1/2 in.: 0 %

Percent of split particles between 1 1/2 in and 2 1/2 in.: 0 %

Percent of crumbled particles between 1 1/2 in and 2 1/2 in.: 0 %

Percent of cracked particles between 1 1/2 in and 2 1/2 in.: 0 %

Percent of flaked particles between 1 1/2 in and 2 1/2 in.: 0 %

Coarse weighted average loss: no data

General comments (publicly viewable) (Max 1000 characters): Weighted average is 2.9%

Test was verified on 7/24/2017 ✔