Summary for Test 2017-06-27-9-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work Description
Location Description
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date06/27/2017 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing06/28/2017
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes550ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)1017273
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size3.75

Test Details

DIME Sample ID: 2017-06-27-9
DIME Test ID: 2017-06-27-9-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-07-24

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 07/07/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 54.0589 lbs
Width at 4 x Load at W1: 1.58542 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.944 in
Measured Minimum Uncompressed Width: 3.7725 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.79 in
Height of Contact Face: 3.7015 in
Spec Minimum Uncompressed Width: 3.7725 in
Area (5 Times of the Height of Contact Face): 18.508 sqin
Half of the Spec Minimum Uncompressed Width: 1.895 in
85 Percent of the Spec Minimum Uncompressed Width: 3.20662 in
3 Times of the Area: 55.524 sqin
4 Times of the Load at W1: 216.235 in
W1 (US Units):3.207 in
W1 (Metric Units):81.448 millimeters
W2 (US Units):1.585 in
W2 (Metric Units):40.27 millimeters
Satisfactory of MR of (US Units):1.621 in
Satisfactory of MR of (Metric Units):41.179 millimeters
Optional W1 Measurement 1:3.2066 in
Optional W1 Measurement 2:55.8942 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point File
Test graph for 2017-06-27-9-1

Test was verified on 7/17/2017