Summary for Test 2024-04-10-23-2
Test performed: CTM 217-June 2011Project Information
| Project Identifiers | Project ID: 994579 DEA: 070W4004 EFIS: 0722000046 |
|---|---|
| DIST-CO-RTE-PM | 07-VEN-101-30.9/R36.3;R40.6/R43.6 |
| Award Date | 05/16/2023 |
| Closeout Date | Not set |
| Work Description | CONCRETE PAVEMENT SLABS REPLACEMENT & SLURRY SHOULDER. |
| Location Description | VENTURA COUNTY IN AND NEAR VENTURA FROM VENTURA RIVER BRIDGE TO 0.4 MILE SOUTH OF PADRE JUAN CANYON ROAD OVERCROSSING AND FROM 0.4 MILE NORTH OF PUNTA GORDA PEDESTRIAN UNDERCROSSING TO BATES ROAD UNDERCROSSING. |
| QA Service Level | 1 (Verified on 07/24/2023) |
Sample Information
| Sample Taken Date | 04/10/2024 | Sample Unique Key | 23 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/11/2024 |
| Sample type | Department Acceptance | A brief description of the sample | Aggregate Type II for Slurry Seal |
| The quantity of what the sample constitutes | 300 tons | From where was the sample collected | Source |
| First name of sampler or witnessed by | Avo | Last name of sampler or witnessed by | Karajian |
| Title of sampler | Plant Inspector | Telephone number of sampler | |
| Laboratory sample identification | Linked DIME Sample ID | ||
| The fabricator/manufacturer/facility name | Pavement Coatings Co Slurry Seal | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | United Rock-Irwindale |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | Type II Slurry Seal | The fabricator/manufacturer designation for the sample | |
| The plant number | Pavement Coatings Slurry Seal | A detailed description of where the material sample was collected | Stockpile |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | fine | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2024-04-10-23
DIME Test ID: 2024-04-10-23-2
Testing Lab: CT D07 - Plant Services
Test Method: CTM 217-June 2011: Method of Test for Sand Equivalent
Test Release Date: 2024-04-12
Test Results
Number of tests: 3
Input Type: Measured
Tester's full name: Avo Karajian
Date of test: 04/11/2024
Temperature correction: 0
Temperature of solution: 75
Clay reading (test 1): 6
Sand reading (test 1): 3.7
Clay reading (test 2): 5.8
Sand reading (test 2): 3.8
Clay reading (test 3): 5.8
Sand reading (test 3): 3.7
Sand equivalent (test 1): 62
Sand equivalent (test 2): 66
Sand equivalent (test 3): 64
Sand equivalent before temperature correction: 64
Sand equivalent after temperature correction: 64
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/12/2024 ✔