Summary for Test 2024-02-27-26-5

Test performed: AASHTO T315-22

Project Information

Project IdentifiersProject ID: 44444
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for submitting Sample information for Asphalt Supplier Certification Program.
Location DescriptionNot set

Sample Information

Sample Taken Date02/27/2024 Sample Unique Key26
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/14/2024
Sample typeVerification A brief description of the samplePG 64-28M
The quantity of what the sample constitutes2 of 2 split sample From where was the sample collectedSupplier
First name of sampler or witnessed byThomas Last name of sampler or witnessed byLudlum
Title of sampler Telephone number of sampler
Laboratory sample identification24-045 Linked DIME Sample ID2024-02-27-20
The fabricator/manufacturer/facility nameGlendale, AZ Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierHolly Frontier Asphalt Company - Glendale AZ MultigradeNo
Multigrade Type Asphalt Binder Mix Number

Test Details

DIME Sample ID: 2024-02-27-26
DIME Test ID: 2024-02-27-26-5
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-22: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2024-04-04

Test Results

Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Karen Sawyer
Date of test: 03/28/2024
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.399 kPa
Phase Angle (δ) (for the 10 cycles): 62.7 degree
Complex Modulus (G*) (for the 10 measurements): 3.973 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 4.47 kPa
Stress Amplitude 2: 0.219 kPa
Phase Angle 2 (δ) (for the 10 cycles): 64.3 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 2.175 kPa
Test Temperature (Specimen 2): 70.0 C
Dynamic Shear 2, G*/sin(δ): 2.41 kPa
Delta at 2.2 kpa: 64.5 degree
General comments (publicly viewable) (Max 1000 characters): RTFO + 6

Test was verified on 4/4/2024