Summary for Test 2024-01-28-21-6
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 994903 DEA: 11430244 EFIS: 1118000033 |
---|---|
DIST-CO-RTE-PM | 11-SD,-125-9.3/13.0 |
Award Date | 09/06/2023 |
Closeout Date | Not set |
Work Description | PLACE HMA, RHMA, SLAB REPLACEMENT, AND ELECTRICAL WORK. |
Location Description | SAN DIEGO COUNTY IN AND NEAR LEMON GROVE FROM 0.3 MILE SOUTH OF ELKELTON PLACE UNDERCROSSING TO 0.2 MILE SOUTH OF ROUTE 125/94 SEPARATION |
QA Service Level | 1 (Verified on 11/14/2023) |
Sample Information
Sample Taken Date | 01/28/2024 | Sample Unique Key | 21 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/29/2024 |
Sample type | Quality Assurance | A brief description of the sample | 1/2" HMA PSU |
The quantity of what the sample constitutes | 6 bags | From where was the sample collected | Source |
First name of sampler or witnessed by | Ben | Last name of sampler or witnessed by | Smith |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0107-PSU | Linked DIME Sample ID | 2024-01-28-20 |
The fabricator/manufacturer/facility name | Vulcan Otay | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-37-0035 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | Plant | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 1/2 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number |
Test Details
DIME Sample ID: 2024-01-28-21
DIME Test ID: 2024-01-28-21-6
Testing Lab: CT D11 - District 11 Materials Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2024-03-07
Test Results
Input Type: Measured
Tester's full name: Melchor Oronoz
Date of test: 03/08/2024
Mass of saturated surface dry sample (before pycnometer) (S): 508.6 grams
Mass of the pycnometer with water and aggregate (C): 993.2 grams
Mass of the pycnometer with water (B): 679.4 grams
Mass of the oven dried sample (before pycnometer) (A): 497.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 508.6 grams
Mass of the oven dry aggregate (for absorption) (A): 497.3 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.553
Bulk specific gravity (SSD Basis): 2.611
Apparent specific gravity: 2.710
Absorption: 2.3 %
General comments (publicly viewable) (Max 1000 characters): Complies
Test was verified on 3/7/2024 ✔