Summary for Test 2023-08-15-96-1
Test performed: AASHTO T308-10Project Information
Project Identifiers | Project ID: 215157 DEA: 021H5704 EFIS: 0216000036 |
---|---|
DIST-CO-RTE-PM | 02-SHA-299-67.8/77.8 |
Award Date | 02/09/2023 |
Closeout Date | Not set |
Work Description | BURNEY CAPM - PAVEMENT REHABILITATION |
Location Description | BUNCH GRASS LOOKOUT RD TO NAPA LN |
QA Service Level | 1 (Verified on 09/03/2020) |
Sample Information
Sample Taken Date | 08/15/2023 | Sample Unique Key | 96 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/15/2023 |
Sample type | Production Start-Up | A brief description of the sample | Lime Treated 3/4-inch RHMA-G (PG 64-16 CR) with virgin PG 64-16 from Valero (Benicia, CA) and WMA (Water Shear Injection) |
The quantity of what the sample constitutes | Production Start-Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Cindy | Last name of sampler or witnessed by | Bryant |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D79328 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | JF Shea Construction — Fawndale Rock and Asphalt (Redding, CA) | Transportation Laboratory (TL) Number | 857912 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Hot Mix Asphalt | HMA Type | RHMA-G |
---|---|---|---|
HMA Grading | 3/4 inch | Lot number | |
Sublot number | HMA Mix Number | JMF3513202360 |
Test Details
DIME Sample ID: 2023-08-15-96
DIME Test ID: 2023-08-15-96-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T308-10: Standard Method of Test for Determining the Asphalt Binder Content of Hot Mix Asphalt (HMA) by the Ignition Method (Method A) (Asphalt Binder Content)
Test Release Date: 2024-02-22
Test Results
What temperature unit is used?: Celsius
Input Type: Measured
Tester's full name: Sean McWithey and J. Ferency
Date of test: 01/31/2024
Test procedure used?: Method A
Mass of the specimen basket assembly: 3110.1 g
Mass of the specimen and specimen basket assembly prior to ignition: 5123.1 g
Mass of HMA Sample prior to ignition: 2013.0 g
Mass Loss: 152.2 g
Mass of aggregate remaining after ignition: 1860.8 g
Correction Factor (Percent by mass of HMA Specimen): 0.20 %
Moisture Content: 0.00 %
Temperature Compensation Factor: 0.15 %
Test Temperature: 538 C
Corrected Asphalt Binder Content: 7.21 %
General comments (publicly viewable) (Max 1000 characters): Pb=7.21%
Test was verified on 2/22/2024 ✔